So many great golden era DD tables out there, what do you recommend for $1000?


Pretty much as the title says.
Have been looking for a while for a decent DD table to add to my lot.
Have bought a few lower end ones and ultimately been dissapointed.
Now I know there were/ are literally hundreds of choices from the Japanese Golden era of DD tables.
Looking for suggestions from actual owners of solid DD tables up to about $1000 .
I have read and read but nothing substitutes for real experience.
This would likely not be my primary table, my Garrard 401 has that position for now.

Thank you.
128x128uberwaltz
Dear @jessica-severin : That QL-A95 makes that the 101 looks as a really mediocre TT ( as a fact it's but this for other time dialogue/discussion. . ).

I have too the information of many others JVC/Victor TTs and from other manufacturers through my japanese bibles ( hard paper. ) but I never gone to those fully integrated TTs pages and is surprising what we can found down there like this Pionner that came with the same tonearm that comes in  the $$$$ Exclusive P-3 ! ! :

https://audio-heritage.jp/PIONEER-EXCLUSIVE/player/pl-70lii.html

Thank you for your real contribution for all of us.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
Uber - I used  Plast-I-Clay Modeling Clay.  I bought 8 lbs. from allartsupplies.com for a little over 20 bucks.  I didn't use it all and gave what was leftover to my grandaughter, so it was a nice "two-fer"!

The  QL-Y66F stock feet are small and springy.  I have springy floors and it was a bad combination.  The MNPCTECH feet are big and heavy and seem to be well damped.  

I did both mods simultaneously, so I can't say which one had more impact, but before the mods I could not turn up the volume very loud at all without getting feedback from airborne vibrations.  Now I can play as loud as I want with no negative effect.  I also had to tiptoe across the floor, and since the mods, I don't think I've ever made the tonearm jump from footfalls.

Dear Raul, thank you. I love digging around audio-heritage.jp
I'm not sure how many of these higher end 1980s Japanese TT made it out of Japan, but they were popular here and they made many variations of models. There are 3 Pioneer PL-70LII on yahoo auction japan right now but they are all expensive in the 160.000yen ($1600) range.  Like other countries the audiophiles always seem to fight over the rare top-end models while the step down models (which are often almost as good) go for much much less. 
Jessica
Raul, The PL70LII is pretty well known to be a stealth bargain, if you "study" pioneer turntables. It only lacks some of the fringe features, including the massive suspended plinth, of the Exclusive P3.  You're correct about the tonearm, too. Sometimes you see them for sale on "Hifido", the Japanese company that sells a lot of vintage stuff of all kinds, both in their real stores in Japan and by mail order. They are completely reputable, and they know how to pack and ship a turntable.  If anyone wants to look, google "Hifido English".  Unless you read Japanese.
It's one curious case where the tonearm alone (from a P3) costs much more than the same tonearm, if you purchase it along with a turntable, like the PL70LII.  In my opinion, the PL70LII with that tonearm is a screaming bargain at $1600 (price on Yahoo as quoted by Jessica above).  I've seen the tonearm alone advertised for as much as $6000.