Zu Omen or Tekton Lore


Best floorstanders under $999 for low power SET amp?

Thanks
mstark
Rocky,
If your Lores are Bone stock and positioned level with your floor,your probably experiencing something different.
The Lores are not a laid back music from the lobby or parking lot presentation,they make me feel as if I am 6 to 8 cocktail tables away from a live Blues band in an intimate night club.
They are a forward sounding speaker.End of story.
But not forward in an uncomfortable way with my amp ect...
If the top end is what bothers you, there is a mod to tame it.And you can tailor it to your ears.
If your speakers have less than 200 hours I'd recommend giving them more time to break in.And Eric is a wealth of knowledge so keep him informed as you go.

I have spent more on cables over the last ten years than I am ever willing to cop too.
Let's just say I wish I had all that money back.
The cables I have now are not a cheap date but not $3,300 for a meter ether.But sounded 99.9% like them.In fact it was nearly impossible with most recordings to tell the two apart A B testing on an Audio Note U.K.single ended rig.
So I'm not eager to buy something I will more than likely
chuck in one of my pile o audio plastic bins.
No disrespect,I just don't feel the need to resurface an all ready smooth road.I can say I like solid core Silver or copper over stranded anything with only one exception.
I am using the same cables as Stevie Nicks and Pat Boon.
There doing just fine with the Lores.



Goraman: thanks for posting your thoughts and experience! I'm quite interested as I inquired with Eric about upgrading my Pendragons to better caps before shipment. However, I decided to delay my gratification a bit so to speak so that I can later appreciate the improvement:).

Would you mind sharing a few things: which caps did you like the best and what size are they? How do you change out the resistors in the crossover?

And which cables are you using btw?

Thanks for the 411.

GPowered: which cables are you using?
Morganc,
Keep in mind it is never a good Idea to use all the same manufacture capacitors in the same crossover.A common mistake.
More over it becomes a bigger problem yet when you run the same capacitors in parallel or in series as each cap make and modle has it's own sonic signature. Some caps are very detailed and etched some caps are just plain smooth,some may lack bass or be slightly rolled off at the top.Put any two of the same together and everything both good and bad can be exaggerated.The capacetor list for the Lores are Clarity Cap ESA, Obbligato Gold and Ansar SPA with silver leads.
All the caps I used are very large.You change out resisters just like caps I used Mills 12 watt but Mundorfs are great too if the values match.I also used Audison 14 AWG.Silver 214 and Sonus 214 from Italy for internal wire.
I hope this helps you,but if you are not sure what you are doing buy the parts you want and let Eric build your cross over using them as the man is good at laying things out nicely and his solder joints are well flowed and twisted together like hell man!
It is easier to copy his crossover on a new larger board from scratch than taking his apart in one piece and rebuilding it.And give break in some time,count the hours on a kitchen timer or stop watch. Best of luck!
Which cables am I using?
Interconnects?

http://www.whitezombieaudio.com/lacacanyacables.html

The very cables in the picture are one of my several pairs.