Meridian dsp

Sorry, do not understand the question. What I do, which is what you and everyone else should do, is bring the speakers home for audition. Then if you like them, guess what? Boom. They are integrated. Your system is integrated.
 
Integrated by the way, means connected together. See: integrated amp.

So the minute you connect your speakers, they are integrated. What else would they be?

steve59
If I understand you correctly you are asking for opinions about DSP with room correction and whether or not you should try speakers equipped with it? As mentioned above, DSP controlled speakers with room correction will go a long way in dealing with room issues. Basic passive room treatment should be implemented to whatever extent possible first. Also, DSP will not transform bad speakers into good ones. One would think that companies that offers speaker systems that are active and DSP controlled are well integrated and should perform well. Also mentioned above, having the speaker system in your own home is the ultimate test. Good DSP system also help with component integration. 

We designed our DSP controlled speaker systems from the beginning to be DSP controlled and encourage our customers to use amplifiers of their choice. Good DSP is very transparent. Some people prefer tube amplification and others SS. The character of the pre-amp and amps does shine through.

So, the system you mentioned might be good but that doesn't guaranty you will like it. DSP or not, systems have their own character.

I read enough threads and have had my own disappointment because as Eric pointed out I’ve bought speakers from dealers after extensive time in a store demo only to be gut punched when I get them home and can’t reproduce the sound that attracted me to them in the first place. My solution was to go with dsp speakers and the synergy is better out of the box than anything I was ever able to cobble together myself.
I’m asking if dsp systems like the kii 3, or M, or the others are rejected out of hand or would you try them?

After almost two decades of trying to help people set up their systems and speakers I can say that the biggest challenge was to convince them to deal with the room to the fullest extent they can tolerate. Times have changed a bit and people are a little more willing to add some room treatment. There are more good products available now, too. Many can’t or aren’t willing to treat their listening room. That said and having learned my lesson, we decided to design our new speaker line to be used with DSP and room correction. To be clear, DSP does not always include room correction. We feel that system / room integration will likely be more successful with this approach and ultimately lead to customer satisfaction. I admit that I am biased but I believe for good reasons. We still suggest passive room treatment first. Even though our speakers are DSP controlled you won’t see us at an audio show without passive room treatment, unless the shippers loose them.

So, unless you (anyone) have a correctly designed dedicated room and speakers that are correctly designed for that specific room, DSP with room correction is very likely to help with system / room integration. Especially in the bass region which is almost impossible to get right. 

I supposed I could have titled my thread 'Why do they sound so good in the store?' and when I get them home they sound wrong. After around 8 pair (probably more) of full range passive speakers let me down I rolled the dice on a pair of DSP speakers and they make music in my room. I don't get it. They're still speakers in a box with no room correction applied. Did I just get lucky or are DSP's more user/room friendly?