DACs for older gear

The bryston sp3 is still sold and sounds absolutely fabulous.  dac technology is very mature and has sounded great for many many years.  I still have a meridian dac from the 90s that is wonderful sounding.  

@dbphd  

Your Ayre DX-5 DSD is a universal disc player (bluray player) therefore has HDMI outputs to connect to either an AV preamp surround processor or an AV receiver for surround processings of your bluray & DVD movies. 

High end two-channel DACs or streamer/DAC or high end stereo gears in general would not have HDMI. 

HDMI is usually for AV (audio video) or HT uses. 

I use balanced output from the Ayre DX-5 DSD to the KX-5/20 preamp for stereo, and have pretty much turned to the Oppo 205 for surround and HT with front LR passed through balanced analog to the KX-5, and surround to a pair of NAD C 268 Class D amps.

If frostdotcom is correct, I might connect the audio HDMI from the Ayre DX-5 to the SP3 for surround and HT.  I can then switch the NAD amps between XLR from the SP3 and RCA from the 205 to determine which I prefer.

I compared two channel Oppo 205 analog out to that of Bryston SP3 and I could not hear any major or minor differences - it was too close to make any call. I did this after careful level matching (which was toughest part) and got my girlfriend to change connection to the amps. I used 3 scenarios

1. Oppo 205 direct to Amp using XLR analog out and Oppo vol control (no SP3 in setup)
2a. Oppo 205 analog out into SP3 RCA analog in (one of few which has bypass); SP3 XLR out connected to amp
2b. Oppo 205 digital in to Bryton SP3 ->amp

I level matched with SPL meter. My Salon2 speakers were set to Large (in both 205 and SP3) so disabled any bass management.

For CD and hi-rez (LPCM actually), I strained to hear differences.

At end of it all, I use bass management so SP3 offers best flexibility for me to use it as a hub. Also my SP3 is the latest model which has multichannel USB in (besides latest 4K module)- I spent $$ for it.

Oppo 205 is fantastic kit- and if one has simple setup with only one source- you do not need a HT processor and Oppo 205 would do. If you have HT setup, and multiple sources, then you do need a processor, and leveraging latest Bryston SP3 is a no brainer.

Edit: My Oppo 205 is modded unit with Oppomod LPS and Clock mods. 

Hope this helps,
Kris

I've settled on separate stereo and HT setups.  The stereo setup uses Ayre 5X Twenty components with KEF Ref 1s.  The HT setup uses the Oppo 205 and NAD amps with 6 KEF LS50s.  Each setup has a pair of subs.  The setups reside in a single rack, but share no cables.

The stereo setup is used mostly for Roon, the HT setup for Cox Cable.

db