Interconnect Directionality


Have I lost my mind? I swear that I am hearing differences in the direction I hook up my interconnect cables between my preamp and power amp. These are custom built solid core silver cables with Eichmann bullet plugs. There is no shield so this is not a case where one end of the cable’s shield is grounded and the other isn’t. 

There are four ways ways to hook them up:
Right: Forward. Left: Forward. 
Right: Backward. Left: Backward
Right: Forward. Left: Backward
Right: Backward. Left: Forward. 

There is no difference in construction between forward and backward, but here are my observations:

When they are hooked up forward/backward there appears to be more airy-ness and what appears to be a slight phase difference. When hooked up forward/forward or backward/backward, the image seems more precise like they are more in phase. The difference between forward/forward and backward/backward is that one seems to push the soundstage back a little bit while the other brings it towards you more. 

What could possibly cause this? Does it have something to do with the way the wire is constructed and how the grains are made while drawn through a die? Am I imagining this? Have I completely lost my mind?
mkgus
cleeds…."Here we go again with a call for blind testing, an exercise that is of very limited value - if any at all - to the typical audiophile."

Respectfully Cleeds, I have no ideal why what I believe is a small group of persons on A'gon would think that blind testing won't yield fair and impartial results.  Please do not repeat the GK arguments against it that the testers are going to rig the test.

Simply put, if you were blindfolded and tasted Coke and Pepsi, would not the one that you like the best be a fair indicator of your preference?  Now I do understand that if the blind test was not performed in your home with your audio system, what sounded best in a foreign system might not sound the best at your home.

As I remember Upscale Audio did a blind test including the Prima Luna gear that was well received?


roberttcan
I spent some time yesterday trying to find any credible evidence that the EM wave flows back and as it moves from the source to the load at near the speed of light, (in a vacuum). I found nothing. And I mean nothing at all that supported your claim. Not even the slightest mention.

>>>>>Wikipedia to the rescue! How often we see this type of statement by a skeptic - “I could find nothing at all that supported your claim.” That’s gold, Jerry, gold! 🤗 But you’d be sure and tell us if you did, right? Wink, wink!
Great,

As you know "some person" who is an expert, why not get them to sign up to this forum, under their own name (so we can verify the claim you are making and his background), AND then, since they appear to be an expert in the field, they should be able to easily formulate and put numbers around, at least ball-park figures for how transmission line effects and other effects related to conduction would impact the audio signal.

I would be happy if they just did the latter and someone else posted it ... formulate and post some order of magnitude numbers, about the potential impact to the audio signal. It sounds like that would be very easy for them?

You make some pretty substantial claims for your cables here: http://www.teoaudio.com/technical/ so I would assume you can quantify them w.r.t. audio? I do notice a claim of GHz bandwidth, but lots of cables have GHz bandwidths and more (obviously at a given source/load impedance).

Interesting use of the term ionic "plasma", it certainly does not fit the normal definition of plasma. If you had said Fermi gas, I think that would be more supportable by standard definitions. This article / marketing seems to be based around Landau-Fermi liquid theories for conduction so at least a link to Fermi gas would apply.





teo_audio
1,153 posts10-24-2019 10:51am
THE ACTUAL PROFESSIONALS .... you know, the ones that make 100GHz cables, that ones that put gigabits through twisted pairs, the ones that developed the HDMI standard, the people who make measurements systems, all the ones where real bits, real SNR, real waveform shape = money, the ones whose customers have sophisticated test and measurement equipment, etc. etc. would never ever claim, except where a directional shield is concerned, or there is an intentional passive element built a cable, that, within the framework of audio, that directionality of an interconnect has any detectable difference in the sound.


" as to that, I know a person who took their physics degree in transmission lines and the like. Basically their masters in the physics of conduction.

they ended up, in part of their resume, running a coast to coast telecommunications system as the head engineer.

And when it comes to audio and the signals involved and what is done in audio, this person quickly came to understand that people connected to and invested in things like the above quote...really don’t know the difference between their backside and a hole in the ground."
The trouble I have with blind tests or any tests really is their inherent fallibility. So many things can go wrong. If the results are negative it could very well be for any of the following reasons. This is not intended to be a complete list.

The system has one or more errors in it.
The system is not revealing enough.
The subject is not capable of hearing the difference.
The test software is out of polarity or just plain not good enough to reveal differences.
Cabling and or electronics are either brand new or not broken in or not earned up properly.
Weather issues mask the audible differences.
Tests can be easily rigged to produce negative results.

On the other hand, if results of a test are positive, I might be more inclined to think something might be going on since positive results were obtained IN SPITE of all the pitfalls. But, generally to be convincing tests should be repeatable and transferable. One test has very little significance especially if the results are negative. If no tests are done at all then someone making bold claims that controlled blind tests will prove such as such is just plain absurd.