Help with hookup


Inherited some audio equipment. Hooking up a McIntosh mc2300 preamp to a McIntosh mc352 amp to a pair of Acoustic Zen Adagio speakers, but I don't get sound out of the speakers. I can hear when I plug in the headphones, so there is that. Any ideas?
128x128fortin
So, this morning when I was trying some things I found that when I had it hooked up to CDR the tuner on CDR and I turned it all the way up I could hear music in the amplifier but not the speaker,. So I tried to change out the cord to the speaker and that didn't make a difference. I will try different speakers and see if that is the problem and check the output terminals to see if they have something coming out of them. Sorry I don't know all the fancy words, but I think you get my drift. As always, thanks for any advice that you have!
If none of the above work and you can't detect a voltage at the outputs then it could be that an internal component failure has tripped the DC protection circuit. If DC is detected in the output signal it is shunted to ground to protect your speakers.
You might want to try single ended connections between the preamp and amp ( rca to rca ).