Budget Tube Amp (newbie)


I'm new to tube amps. I need some advice as to a good budget tube amp with good bass that will push my large Advent speakers. Please keep in mind that I don't know anything about tube amps and don't want to pull the trigger until I can get some advice. I'm new to the Forum. Many thanks from an old guy.
Best regards,
Rob
shutupuface
check out decware.com - made in Joliet, IL. Top quality sound, build and service.
Pick a used PrimaLuna integrated that’s at the top end of your price range (I do think they improve up model, so pay for what you can afford). They are a great gateway drug into tubes and they can drive fairly difficult loads, and certainly medium difficult ones. You may never go back to solid state.  I still own 2.
I also love Decware, but I have only owned (still own 2) of their low WPC amps and those low WPC amps wouldn't drive those speakers as well as PrimaLuna in my experience.  I know they make some higher power ones.

All right, let me be brutally honest. What is it you think a tube amp is going to give you (or do you just want to try one to see what all the "fuss" is about?). Did you get the Advents with a tube amp in mind? I ask because there are better old speakers to mate with a tube amp than the Advent.

The Advent isn’t (by current standards) particularly transparent, and is on the warm side of neutral (imo). A tube amp of the old-fashioned, classic type (Dynaco, for one) won’t help matters (inexpensive tube amps---the RM-10 being the rare exception---tend to error likewise. The Advent was designed to be powered by a solid state amp, with a low output impedance.).

Maybe a modest tube pre-amp (with your budget, look at the Schitt Saga +) and a decent medium-powered solid state power amp (used Parasound A23?) would be the way to go. But I say that as one ignorant about current integrateds. Separate power amps are almost all superior to the amp section of integrateds (imo), especially at the $1,000 level. Too bad the NAD 3020 is underpowered!

Number one..resign yourself to a tube integrated (keep it simple) and be ensured complete compatibility vs going the amp-preamp experimentation route where negotiating the learning curve could become costly!
for your Advents I would pass on the Rogue ..why shoot a mouse with an elephant gun?
I suggest finding a clean used Line Magnetic  EL-34 based integrated and its in your budget.