Dear friends: It's not weird that only one gentleman ( @erik_squires ) gave me his advice on caps and I say is not weird because like a years ago I came to this same forum and I posted in a thread already opened thread asking for help to all those experts that were posting in that tghread but that when I ask for their help only one of them told me that he needs to know my speaker description/system and when I answered to him unfortunatelly he never came back to me with his advice.
So with almost no help I decided to buy the Jantzen Alumen Z capacitors when no one spoke about it, all those experts were focus in Duelund, Jupiter, Mundorf and the like but no one mentioned the Jantzen ones.
Well seems to me that again I will have to take the decision by my self and nothing wrong with that.
Maybe some of you can ask why I decided for the Alumen Z when everyone was around the Duelund/Jupiter/etc, etc " party ". Answer is easy: I learned reading through the net and talking with caps manufacturers and from my past first hand experiences with caps and my first move was to fix my main target for those caps that was very similar of what I'm looking for in this thread.
I have not experiences with the Jupiter but I had with Duelund and mundorf and both are far away to be neutral but the other way around: full colored. Just does not goes with my target.
yes I know that the Humble......caps test comparison site told us that Duelund are fully neutral but the concept of " neutral " is different for that Humble..... gentleman whom made the comparisons and some of us and is easy to say it when we read the words he used to express his experiences with the different caps and my system audio units/devices are different too.
It's easy to take in count something is wrong in the experience tests description when speaks from neutrality but the description is full of adjectives that said are faraway from be neutral : smooth, organic, darkness, richer, deeper, mature, bigger, etc, etc. All those adjectives talking of caps characteristics. Why if are way " neutral " ?
From years now I know the critical main importance of the dielectric materiali caps , circuit boards in electronics, cables dielectric material and the like and nothing is near Teflon but contrary to scientific data that comes with the PTFE those very expensive caps with the higher grade evaluation from 12 to 15+ no one use PTFE but beewax over paper or oil and a lot of other dielectric materials with out any single scientific test of the dielectric material used by the caps manufacturers only : bla, bla, bla. Here some reviews that confirm about:
http://www.enjoythemusic.com/diy/0514/jupiter_copper_foil_paper_wax_capacitor.htm
I know for sure by first hand experiences in electronics and speaker crossover that nothing beats Teflon, well not even near it. Unfortunatelly is way expensive but I'm looking for my last caps up-grade so one way or the other I must go with the PTFE caps and I will do it step by step due that I'm not a rich man and maybe I be obligated to take one additional step before the Teflon ones and this step could be the Jantzen Amber Z in the tweeter, band-pass and midrange. I need four 4.7uf and two 16.8uf for thopse drivers and following erik advise the CMR for the woofers.
I forgot, the other caps that could interest to me are the Audyn. Any first hand experiences(advise about will be appreciated.
Cu PTFE V-caps are something with all the atributes only the live MUSIC has, there are other Teflon caps that are very good too and all are expensive but worth to have it.
Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
I
So with almost no help I decided to buy the Jantzen Alumen Z capacitors when no one spoke about it, all those experts were focus in Duelund, Jupiter, Mundorf and the like but no one mentioned the Jantzen ones.
Well seems to me that again I will have to take the decision by my self and nothing wrong with that.
Maybe some of you can ask why I decided for the Alumen Z when everyone was around the Duelund/Jupiter/etc, etc " party ". Answer is easy: I learned reading through the net and talking with caps manufacturers and from my past first hand experiences with caps and my first move was to fix my main target for those caps that was very similar of what I'm looking for in this thread.
I have not experiences with the Jupiter but I had with Duelund and mundorf and both are far away to be neutral but the other way around: full colored. Just does not goes with my target.
yes I know that the Humble......caps test comparison site told us that Duelund are fully neutral but the concept of " neutral " is different for that Humble..... gentleman whom made the comparisons and some of us and is easy to say it when we read the words he used to express his experiences with the different caps and my system audio units/devices are different too.
It's easy to take in count something is wrong in the experience tests description when speaks from neutrality but the description is full of adjectives that said are faraway from be neutral : smooth, organic, darkness, richer, deeper, mature, bigger, etc, etc. All those adjectives talking of caps characteristics. Why if are way " neutral " ?
From years now I know the critical main importance of the dielectric materiali caps , circuit boards in electronics, cables dielectric material and the like and nothing is near Teflon but contrary to scientific data that comes with the PTFE those very expensive caps with the higher grade evaluation from 12 to 15+ no one use PTFE but beewax over paper or oil and a lot of other dielectric materials with out any single scientific test of the dielectric material used by the caps manufacturers only : bla, bla, bla. Here some reviews that confirm about:
http://www.enjoythemusic.com/diy/0514/jupiter_copper_foil_paper_wax_capacitor.htm
I know for sure by first hand experiences in electronics and speaker crossover that nothing beats Teflon, well not even near it. Unfortunatelly is way expensive but I'm looking for my last caps up-grade so one way or the other I must go with the PTFE caps and I will do it step by step due that I'm not a rich man and maybe I be obligated to take one additional step before the Teflon ones and this step could be the Jantzen Amber Z in the tweeter, band-pass and midrange. I need four 4.7uf and two 16.8uf for thopse drivers and following erik advise the CMR for the woofers.
I forgot, the other caps that could interest to me are the Audyn. Any first hand experiences(advise about will be appreciated.
Cu PTFE V-caps are something with all the atributes only the live MUSIC has, there are other Teflon caps that are very good too and all are expensive but worth to have it.
Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
I