2. analog
  3. 152510-4440

Turntable adjustment

I've recently acquired a Technics SL-QD33 turntable with a p-mount cartridge. Anti-skate is factory set and non adjustable. Also, its fully automatic. Everything worked fine with the stock cartridge, but I wanted to upgrade so I purchased the Grado Prestige Green cartridge, which has improved the sound.  However, now when I start to play an album, the tone arm no longer places the stylus in the groove, thus, it slides off the record. What can be done to address this issue? 
hawk28
hawk28 OP
121 posts
 
Cleeds, thanks for the advice. Based on your questions, I went back and adjusted it from the fixed 1.25 to 1.5, and bingo, the stylus landed correctly and smoothly on the record.

But I will look into that VTF scale for the future. Thanks to all who helped me out.
yogiboy's avatar
yogiboy
5,766 posts
 
If you go to the VINYL ENGINE you can look up the owners manual. The tracking force is set at 1.25 grams with a 6 gram cartridge. It can only be adjusted plus or minus by .25 gram!

https://www.vinylengine.com/
hawk28 OP
121 posts
 
I have the manual. Thanks!
millercarbon's avatar
millercarbon
12,531 posts
 
Am I reading this right? You put a $100 cartridge on a $70 turntable?

Anything around this level the turntable comes first. Live and learn.
hawk28 OP
121 posts
 
Millercarbon, given the fact that the turntable didn't cost me a dime, the money I spent on the cartridge was well worth it.
More to discover