2. analog
  3. 152647-116573

Best Way for my TT to reach my Pre-Amp!?

I have a Rega Planar 3 that sits a few feet too far away to reach my Marantz AV7704 phono stage.

whats the best way to reach my Marantz preamp processor with the short 2 foot phono cables that come with the Rega?

It sounds like rca extensions are going to cause too much capacitance and there is also a difference between phono extension cables and rca cables. Please teach me! 
craigert
craigert OP
147 posts
 

https://audiokarma.org/forums/index.php?threads/how-good-is-the-marantz-phono-stage.686895/

I believe I was reading this! 
craigert OP
147 posts
 
Ok dumb question. When I buy a phono preamp, will no longer use the phono input of my preamp processor and will instead use the CD line level inputs correct?
big_greg
6,726 posts
 
Not a dumb question and your assumption is correct.  You can use any of the other inputs but the phono input.  If you use the phono input you'll be amplifying the signal and then amplifying it again and you'll probably get a nasty noise coming out of your speakers.
big_greg
6,726 posts
 

https://audiokarma.org/forums/index.php?threads/how-good-is-the-marantz-phono-stage.686895/

I believe I was reading this!
That discussion was about the Marantz two channel integrateds, which are different beasts from their surround sound processors.  I didn't see any mention of the AV7704 in that thread.  My suspicion is that the phono pre in the AV7704 is not going to be as good as the ones used in their two channel integrated amps.
millercarbon's avatar
millercarbon
12,531 posts
 
Holy crap! Did not even notice this is AV! Of course the phono stage (and everything else) in that will easily be massively improved with anything, absolutely anything- other than of course any other AV type component. 

Wow. I mean wow. AV. Well the good news, only place you can go from here is up. Everything everyone said about how much better you can go, multiply by 10. 
More to discover