2. analog
  3. 152772-139114

Cat jumped on turntable

OK, I know the obvious response about this but moving past ditching the cat . . . I was playing my VPI Scout 'table with a Dynavector Karat cartridge when the cat (Jack) leaped onto the 'table.  The tone arm slide across the record and the platter stopped.  After addressing the situation, I didn't see any obvious problems (but I have an untrained eye) and dropped the needle.  The tone arm immediately slide across the record to the center.  Upon reflection, it seemed like the tone arm was light since it moved pretty effortlessly.  Before taking it, I thought I would solicit some thoughts here.
scarlson
s2000cr
34 posts
 
Yes on no stylus. 

Don't ditch the cat. That's too light of a punishment. Send kitty to permanent cat hell. Get a smart or assertive dog. 
boxer12
8,656 posts
 
" Get a smart or assertive dog"
Do they make those? 
bpoletti
1,553 posts
 
@s2000cr

+2 for the cat

Agree with missing stylus.  Nothing at the end of the cantilever to hold the groove.

But don't try anymore record testing since the bare cantilever may damage the records.

When you do get a new cartridge of stylus, check your anti-skate setting.  Sounds like it's a bit off if the arm just skates across the record.  
handymann
383 posts
 
+1 for Cleeds.
Didn't read the rest-too busy, but I would bet my ex-wife that's what it is.
bpoletti
1,553 posts
 
@john_g -

I had Soundsmith replace the cantilever and stylus in an old Lyra Clavis Da Capo with a Boron cant and line contact stylus. Thought I'd see if the cart could get a second life.  I was quite satisfied. The rebuild with the Boron stylus outperformed the original cart by a significant amount in all categories.
More to discover