2. home-theater
  3. 146911-72084

Have a pair of REL S3 HO and they don't produce enough bass

Hi all-

Just picked up a pair of REL S3 HO subs to work with both my 2 channel system and my home theater. The high output speaker connections on the subs go to my 2 channel system and plug into each mono block amp. The LFE connection from each sub hooks into my Anthem 720 receiver for home theater. 

For the 2 channel system it seems to work well. Nice low bass helping out my Focal Kanta No. 2 speakers. 

However, for the home theater system, they just don't produce enough bass. I have to turn them ALL the way up using the sub's LFE volume control, AND turn them all the way up in my Anthem receiver settings to get any semblance of home theater bass. I know this isn't normal, so something has to be either wrong, or the subs just aren't meant for home theater use.

I was using a pair of SVS 12" subs and man those things rocked. However, I picked up the RELs so I could integrate them with my 2 channel system as well, something the SVS' could not do.

Any idea what could be the problem? 

A side note: I have NOT run Anthem's ARC program again since buying the RELs. Perhaps that could be the issue, but I didn't think it would make that much of a difference. However, I could obviously be wrong. :-)

Thanks!
sadcaper
ricred1
2,045 posts
 
The REL S3 is designed for music. REL designs subs specifically for HT. In my opinion JL Audio subs work better when used for both music and HT. SVS is very good for HT.
chazzzy007
540 posts
 
Play with the HI/LO level adjustment...1 click at a time. I can quickly fill my room with more bass than my neighbors can stand with 1 S5 SHO. It does take some time and tweaking to get it dialed in but the results are worth it.
sadcaper OP
2 posts
 
Play with the HI/LO level adjustment...1 click at a time. I can quickly fill my room with more bass than my neighbors can stand with 1 S5 SHO. It does take some time and tweaking to get it dialed in but the results are worth it.

The problem is that I'm only connecting the LFE input to the sub from the Anthem receiver, so there's really only one adjustment and that's the LFE volume. 

I've been working on this off and on since I originally posted this, and I've gotten nowhere. I called the shop I bought them from and asked if they thought trading them both in for one S812 would help and he said probably not. He thinks it's something with the Anthem setup that's not delivering full power to the REL. 

I don't doubt that, but I've poured over the Anthem setup and can't find anything that I haven't tried already. I turned ARC off/on, changed the crossover point...nothing changes the bass level. I should be getting blow away with the LFE volume cranked to the max...but just very OK HT bass. 

Not sure where else to go cuz my 2 channel sounds amazing with the REL sub! 
bcwang
1 posts
 

Did you have any conclusion to this?  I also had the same problem with an S3 non-sho version. At max volume it barely output anything with my receiver maxed out. Even though I had a T9 that could be run 1/4 of the way up and it was louder already. I thought the S3 was defective but when Rel got it, they measured that everything was to spec. So definitely there is something fishy. In any case, I ended up using the high low level inputs instead of the 0.1lfe input and now it has enough gain to be used for HT. However, I can’t use the speakon in parallel this way so can only use it as a dedicated HT sub this way. 

More to discover