Just looked at the Defy 7 schematic, audio section. It looks like the 12bz7 would work ok for the audio circuit voltage settings. BUT there is a danger it will draw too much heater current from the filament winding, along with the E80CC, which also draws double the heater current of the original 12au7. I don’t have the power supply section schematic here.
The gain of a 12bh7 is 16.5, the E80CC gain is 27, the ECC99 has a gain of 22. The 12au7 has a gain of 20. Since the 12au7 gain and transconductance sets the voltage for the rest of the input stage on the Defy 7 I’d have a tech familiar with tube circuits to check the voltages and currents over with these alternative tubes you’re trying. There might be a risk of frying the heater winding with too much heater current from these bigger tubes.
The gain of a 12bh7 is 16.5, the E80CC gain is 27, the ECC99 has a gain of 22. The 12au7 has a gain of 20. Since the 12au7 gain and transconductance sets the voltage for the rest of the input stage on the Defy 7 I’d have a tech familiar with tube circuits to check the voltages and currents over with these alternative tubes you’re trying. There might be a risk of frying the heater winding with too much heater current from these bigger tubes.