Getting close to starting the upgrade process...


About a year ago, I decided to get back into vinyl. I've had a Linn system for about the past 20 years. I use it for both 2 channel and video. I've got a Majik DS, Roon, Linn Kisto, 2x 5125 5 channel power amps with active cards installed, bi-amped active Ninka's, Sizmik Sub, Trikan center channel, and Unik surround speakers. I added an Emotiva MC-700 processor above the Kisto when the codecs evolved and run analogue outs for each channel into the Kisto for video.
  
I was not sure how much I would use a new turntable so I started out by buying a base Rega P1 plus. I ended up buying a bunch of records and really enjoying it. While buying someone's record collection off craigslist I was also offered their turntable. It was a Micro Seiki dd-35 with the MA505 arm and an AT150MLX cart. I picked up a Mofi studiophono preamp and tested against the base Rega. No contest. The Micro Seiki smoked the Rega. I sold the Rega and have been using the Micro Seiki for almost a year now. Since getting back into vinyl I've been buying and playing more 2 channel music than I ever did in the past. As a result I have been considering upgrading part or all of my system.
  
After months of research, I am getting close to making my first big purchase and wanted to get some opinions. I have explored several options on where to start (and possibly end) on this process. I have considered starting by replacing my older sub with a pair of new REL's. I have considered starting by getting a more robust phono preamp (possibly a used Uphorik or a Sutherland). I have also done a deep dive on turntables and have considered starting with a new deck. I have looked into new and used options from Linn, REGA, VPI, Technics, Mofi, Clearaudio, Sota, Well tempered, Origin Live, and GEM Dandy. I like to buy equipment that will keep me happy for a very long time. When possible I try to buy used due to the tremendous values that can be had.
  
After digesting a lot of information, I think I am leaning towards starting by getting a new GEM Dandy Polytable with the 12" Jelco arm and a moving coil cartridge (still undecided). It seems like a really well designed table that clicks all the boxes for me. I like that it seems fairly priced, easy to setup and use, handmade in the USA, and that it has all of George Merrill's best turntable designs/upgrades including the fluid damped motor system of the 101.3 and the digital motor drive to change and monitor speed. It seems like everyone that buys that table is happy with it. You don't see many on the used market. I am thinking of pairing that purchase with a Sutherland phono (possibly the Little Loco) and seeing how those two upgrades integrate with my existing Linn electronics and speakers.
  
My issue with trying to stay Linn and get an LP12 is that new I would probably want at least an Akurate level table and I don't want to spend $10k on a table. I considered used but LP12's are so finicky and I know service and upgrades at my local dealer cost a fortune. To be honest investing significant money in any used table scares me a little. I did find a good deal on a used Uphorik preamp but now that I am considering leaving the Linn ecosystem on the table that purchase does not seem prudent. All the other turntable options seemed to have issues with regards to price, features, performance, ease of use, reliability or support.
  
I realize that this level of front end will probably make me want to upgrade the Linn electronics and speakers at some point. Maybe not? I think leaving the Linn ecosystem for this first purchase, will give me more flexibility as I move forward. It would be nice to have the freedom to easily swap out or try something new. Right now I can't easily change my front speakers because my power amp has cards installed in it for the speakers. There are tons of great values in electronics and speakers in the used market too. I am actually looking forward to exploring other speaker brands and technologies. I will probably stay solid state with the electronics though because the system is used so often with video.
  
I would love to get your thoughts on any of the subjects above. I would especially like to hear from the GEM Dandy Polytable Super12 and Little Loco owners. I would also love recommendations on picking out a cartridge for this setup. The Hana ML and Ortofon Credenza Blue were recommended by George. The ML is at a much better price point but I have not really done a ton of research on cartridges. I listen to mostly jazz, vocals and classic rock. I despise surface noise and a harsh or bright high end.
  
Thanks in advance for your input.
128x128snatex
Dear @snatex :  I owned and own MM/MI and MC cartridges ( over 120+ cartridges that go from humble ones to top tiers. ) and in all designs exist very good quality performers.

You asked for a very good MC one by Ortofon and here you have it inside your budget:

https://www.audiogon.com/listings/lis9j252-ortofon-cadenza-red-new-cartridges

and other very good option is this one:

https://www.audiogon.com/listings/lis9j39c-kiseki-blue-n-s-brand-new-cartridges

I don't have experiences with the Little Loco but I know very well Sutherland designs and is an excellent designer and I think you can't go wrong with.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
The question about cartridges appeared here every week from different people, i wish someone could use "search" first, because so many information already on audiogon and we can only repeat it again and again, especially about MM/MI carts.

First MONO Moving Coil was invented by Ortofon in 1948.

BUT Joseph Grado later invented FIRST STEREO Moving Coil cartridge, however his brand is making Moving Iron cartridges. Here is a nice documentary about GRADO. Joseph Grado, like Mr.Pickering and Mr.Stanton, believed that MC cartridge can’t be good, those people designed and improved MI and MM cartridges all their life. Both brands made low output MM/MI as alternative to LOMC. Stanton/Pickering made extremely low output (low impedance) MM for use with headamp or high gain MC phono stages, but the cartridge was a Moving Magnet. Very interesting!

Since i changed my amp from tube push-pull to a solid state current mode single ended First Watt F2J the resolution of my system became so much better, not only resolution, everything is better, but the amp designed for crossover less speakers (full range drives). In this setup my Joseph Grado Signature XTZ (MI) quickly became one of my favorite cartridge! This is the best model designed by Joseph himself in the 80’s, so it is vintage MI, but the styli are still available from Grado. I remember that with my ex tube amp the Grado wasn’t so good in my system (even with the best vintage telefunken tubes). I am happy that i found superior technology and i don’t need tube gear anymore. Mr. Nelson Pass is genius and his solid state amps are the best, very impressive indeed (even for tube lovers).

Apart from Grado XTZ there are many more absolutely killer vintage MM cartridges and nearly all of them advised by me and others here on audiogon. I like top of the line Pickering and Stanton models so much. Apart from the American manufacturers there are so many amazing cartridges from Japanese designers! You can just search or simply ask in direct.






You will also find that the “Cartridge Man” in the UK also builds MI carts.
Isn't the Cartridge Man is just a customized Grado cartridges? 
The generator looks identical to Grado, i believe Grado is a supplier for Cartridge Man
Snatex, The Quintet Black, not sure what It costs now. With your concrete floor go with the Merrill and spend more on the cartridge. The only down side would be if you were to move to a location without concrete floors.
Any rebuilt SOTA will run like a brand new one. I still have my first Sapphire. It has never been touched and it runs like new at 38 years of age. SOTA has always taken care of it's customers I can not believe they would ever leave you in a lurch.