2. speakers
  3. 147808-7805

Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure

Cube Audio (Poland) designs single drivers and single driver speakers. 

Principals are Grzegorz Rulka and Marek Kostrzyński.

Link to the Cube Audio Nenuphar (with F10 Neo driver) speaker page: 

https://www.cubeaudio.eu/cube-audio-nenuphar

Link to 6Moons review by Srajan Ebaen (August 2018):

https://6moons.com/audioreview_articles/cubeaudio2/

----------------------------------------

Parameters (from Cube Audio):

​Power: 40 W

Efficiency: 92 dB

Frequency response: 30Hz - 18kHz ( 6db)*

​Dimensions: 30 x 50 x 105 cm

Weight: 40 Kg


* Frequency response may vary and depends on room size and accompanying electronic equipment.
david_ten
david_ten OP
5,480 posts
 
May be yes or may be no...

As compared to $46,500 for a pair of 5 inch Field-Coil Drivers...and...
$23,000 for the cabinets... : )

* ~ June 2009 pricing.
toetapaudio
474 posts
 
@kalali, pricey? Not considering the performance compared with other speakers in the same price group. The Cube Mini Nenuphar’s retail for £10,250 in the U.K.
david_ten OP
5,480 posts
 
I have replaced the front stock spikes and the rear rubber bumpers with brass spikes, as a first-step isolation effort.

My goal is to maintain the factory height from the floor and the factory angle - front to rear. [Note: the Nenuphar speakers are bottom ported]

I went with Eden Sound's Solid Brass Spike (extra large) for the front with it's matching Point Receiver (extra large)  and the Solid Brass Hemi-Spike (extra large) for the rear.

Immediate performance / sound quality differences and upsides. I will report more later.
charles1dad's avatar
charles1dad
10,250 posts
 

David,

I'm not surprised that  stepping up to a higher quality better  engineered brass spike would  be noticeable. Better vibration/resonance management is a worthwhile  pursuit. Particularly a speaker the high caliber of the Nenuphar will easily reveal the differences.

Charles

ag3__
47 posts
 
Anyone have a detailed comparison between the mini and the full size (i.e. the 8" neo vs the 10" neo ?). Obviously a little less on the lows but what else is similar/different ?

If I can get away with 90% of the bass for a bit cheaper I'd lean towards the mini, the big guy is just a bit out of my budget right now.

Thanks guys 
More to discover