[help] I'm too Boomer to stream. :-(


So I purchased a Bluesound node 2i after a previous discussion here. Now I can't get the node or BluOs program to recognize my music on other laptops that are on my same wifi.  When my laptop and hard drive was connected to my Parasound Zdac, I could usb the computer into the dac, and use an optical cable from my tv out to the dac.  The node doesn't seem to have a way to allow my tv into the node's dac (my tv only has optical & hdmi out for sound) & node has no inputs for hdmi or toslink) so I'm stuck with the dac of the node for streaming music and the zdac for tv audio with the two different analog outputs from 2 different dacs going into my integrated amp. I'm frustrated and feel like I spent this money for a ghetto rig, plus I can't even make libraries , etc. Totally confused and have tried making everthing "dicoverable " on network setting to no avail. So lost, angry, sad, confused and frustrated. And I swear to god if millerwhoever says I should have bought a tricked out fuse or dumb little cone, I'm gonna lose my s***.
128x128labguy
Spirit of radio and goose and OP - my streaming experience has been painless but I have a neighbor who is trying to do this ‘on the cheap’ and I have learned to avoid several errors:

1 - do not go wireless - you lose quality fast.
2 - trying to stream via a computer or download music files off a normal computer just generates poor quality. UBS ports are very poor quality ‘generators’.

i do have a great CD collection and I have / still use my Yamaha CD player - the 2100. Just bought a new DVD / CD player Panasonic 9000(?) . Both are in separate stereo systems - but my LUMIN D1 feeds both systems via balanced outputs to system 1 and RCA outputs to system 2.The RCA interconnects are 15 feet long as the second system is in the ‘bonus room’ upstairs. The KEY is it is hard wired. I feed the D1 via an Ethernet cable from my router - again hard wired. My I pad mini works in both rooms wirelessly and controls the system just fine.

If if you cannot run an Ethernet cable to your stereo - please consider locating the LUMIN near your router so it is hard wired and run long RCAs to your stereo - my 15 foot RCAs were costom made by Anticables - again not cheap but high quality.

i hope this helps.

Happy Listening


Goose and OP - go to Upscale Audio’s website and run their review of the LUMIN T2 - about two thirds of the way thru he addresses the Ethernet cable issue - he states “for $25 we can sell you a cool box that connects to your router wirelessly but then has a wired Ethernet port that then allows you to connect the LUMIN via an Ethernet cable. I have never used this ‘cool box’ but they are a LUMIN dealer and a very reputable Hi Fi shop. Hope this helps.
Sounds like the cool box is a range extender which could help unless you have drop outs now you will probably  still have them. Using a mesh system might be a better option. 
Sounds like the cool box is a range extender which could help unless you have drop outs now you will probably still have them. Using a mesh system might be a better option.

That's exactly what it is. I went the mesh route personally, a terrific solution for my needs, which include both a Sonore microRendu and a Bluesound Node 2.
Op please reach out to us, we have a ton of experience in this arena.

We regularly have integrated Nodes, Heos, Naim devices with many others via our custom installation company.

We are also major audiophile retail company with Naim, Nad, Parasound and many other products on display.

We can assist you.

Dave and Troy
Audio Doctor NJ