2. speakers
  3. 1301612195

DIY. Whose speakers would you use?

If you could pick and choose from any parts out there, which tweeters mids and woofers would you spec for a DIY set of speakers? What about the crossover electronics? Which caps, etc? Crossovers to be internal. Amps SS.
Thinking caps on please!!
Emphasis on boxes for serious listening.
Thanks. Have fun with this!!
edgecreek209
3wayxover
28 posts
 
Hi,

I believe drivers, parts, and boxes should be viewed as a sum rather than parts. Example, a ribbon tweeters may be great, but its xover point my be high and requires a mid range that can reach higher frequencies. Conversely, some of the Scanspeak tweeters are awesome and may allow for a lower xover point, allowing you to pick a different mid. A great diy speaker site is linked below. All the parts interact together, so it is the best integrated system is what you are looking for. Enjoy.

http://www.troelsgravesen.dk/Diy_Loudspeaker_Projects.htm
edgecreek209 OP
10 posts
 
Dan ED,
I welcome all comments relevant to the topic. That is more than a bit off the mark.
unsound
7,336 posts
 
I would consider using:
German Physiks Troubadour 80's
Huff Sub One's
TacT Boz 216/2200's
Alpha-Core Goertz AG2's
Choose your own clocks, drive, server, etc.

That is, if I could afford it.:-)
dan_ed
2,451 posts
 
Whao-up, Edge. You and I are both saying good kits, well engineered kits, are every bit as good. Some folk are trying to say that no matter what kit you get it won't be as good as an "audiophile" level speaker. It ain't me saying that.
timlub
2,042 posts
 
Hi Edgecreek209, I have built many many speakers. To accurately answer your question we all should know the answer to a couple of questions.
Are you capable of crossover design or are you looking for a pre designed product? If you have a good design, can you do the crossover build or are you looking for pre built crossover? What size room will they play in? How much power do you have for them? I see that you will be using solid state so phase angles should not be a problem, but will your current amp drive 4 ohm ok or are you limited to 6 ohms and above. What type of music do you listen to? How loud do you listen? Are you looking for a floor standing speaker or are you ok with stands? Budget?
Once you answer all of these questions, we can narrow your choice down to 400 combinations or so, but truly, once you answer those questions, I will give you a couple of solid recommendations either from Zalytron, Madisound or Parts express. Good Listening, Tim
More to discover