BEST HARMLESS/SIGNATURELESS SPEAKERS CAPACITORS.

I forgot. Please don’t wait/expect that you will listen with the Wima caps something different but " similar " to those colorations/distortions we are accustom to.

So we need to give time to our ears/brain to switch to the new kind of sound. It’s important this issue because Wima has not colorations you can detect it and the very low distortion levels is omething that we are not accustom to.

Well if some of you test those MKP 10 you will have a new experiences with your room/systems.

Something I had to do was to fine tunning ( again ) the system subwoofers and a minimum position change in one of the main speakers.

Btw, something that improved in my system through Wima is the solid/solidity focus in the sound stage. I’m still learning about the improvements the system achieved.

Again, that the extremely low price of Wima don’t worry you don't be intimidated for it. I know that we can ask: how a 8 dollar cap can outperforms a 400 dollar caps?
Wima is the kind of audio devices where price has not any relationship with the devices quality performance levels that’s just superb.

R.

Dear @grannyring  : The ODAM caps has to wait for a test till exist the caps values for my speakers mid-range.

R.

Dear friends : I can't find out yet the source for the Wima 100uf that goes in the speaker crossover.

In the mean time I'm thinking to make a really critical test that it's to change the V-cap Teflon Cu for a MKP 10 in the high pass filter in my bi-amp speaker/subwoofer.

I don't use the subwoofer high pass electronics instead I made the high pass filter taking advantage that my Levinson amps are coupled by cap at the input.

To do that I need first than all open the amps and take a look/measure the distance between the circuit boards holes because the original cap was 2.2uf and for the high pass is way lower value and due that the Wima are radial caps I think maybe I can't do it directly because the lower value cap has a shorter distance in between pins and I don't want to add cable to solder at the board.

I will do all my effoprt I can because if the Wima can, at least, even the V-cap Teflon Cu well that could be admirable for say the least. 
We will see.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.

Hi Raul... finally ordered a pair of the MKP10s to try against my 4.7uF Duelund Tinned-Copper CAST high-pass tweeter caps.  I'll let you know what the comparison sounds like.  Also planning on trying the ODAMs in my pre-amp, but am not quite ready to spring the $150 for a trial... easy to pull the trigger on the $20 for the WIMA capss and shipping.

Dear @cal3713  : Good, we will see what happens with your experiences about.

Other that the ODAM has a limited cap values and due that I own the OIMP  where the MKP 10 are way superior performers I could think that maybe the ODAM is not the response against Wima but I never know that till I testesd.

R.