Thiel Owners

I would love the opportunity to hear any Ayre amp on any Thiel speaker, especially with coaching from you guys.
I've been told that Jim greatly appreciated Ayre's products.

As a Modus Operandi, Thiel's listening always guided our work and led the way toward solutions. Measurements were taken to make sure that the audible improvements were valid and to guard against the paths of seduction where one or some elements might be improved at the expense of other elements. That was not acceptable in Thieldom.

In my present Laminar Launch investigation, I am honoring Jim's approach and standards. I can make no change if it compromises some other measured elements. I am chasing a clearly audible improvement in inner harmonic detail and reduced harsh glare with large, complex signal. The improvements are real and verifiable with other listeners, and achievable via multiple subtly variant techniques. Presently I am using measurements to identify which combination of techniques produces the least compromise of measurable elements. A particularly interesting measurement is harmonic distortion. That envelope varies between -50dB and -100dB and the envelope is changed via different solutions. I intend to find the combination that both produces the desired sonic effects AND reduces harmonic distortion, smooths group delay, quiets the waterfall thumbprint and flattens frequency response. By ear alone, I would be lost, since 4 different solutions have produced pleasing results, all demonstratibly better than stock. I'm zeroing in on a best choice.

This MO is what we practiced at Thiel Audio, although my explorations go beyond what our budgets of time and cost would have allowed.

@beetlemania, The CS 2.4's measure closer to 2 Ohms than they do to 4 Ohms. As there is a direct correspondence model between static impedance figures and sensitivity, measurements are typically made at such fixed points. I don't agree with your assertion that measurements tell you "nothing" about how an amp sounds. Quite the opposite, I think that while measurements might not tell all about how an amp sounds, some aspects of sound are quite predictable from measurements. Frequency response, impedance, power output, distortion, harmonic content, etc., etc., and when and where they are applicable can give one quite a bit of insight into predictable sound. These measurements also provide manufactures an opportunity to provide consistent results to the end user from sample to sample of a given product. They also indicate in what situations a product might or might not be appropriate. Furthermore, measurements give the consumer an opportunity to discover whether a manufacturer knows and or cares about what they are doing.

The amplifiers under consideration are not inexpensive. Having such a generous budget should probably allow for consideration of more options. That the products under consideration measure as they do, suggests that they might have been intended for other different uses. In other applications they may possibly be ideal.

The quote from Thiel is most interesting.  What is the intention of the use of the words "high sonic quality". In my conversations with Jim he told me that when he referred to an amplifiers power output, he was referring to standard 8 Ohm ratings. And, that recommendations for power output was with the understanding that one would be using a quality ss amp that could double down, and that if one was for instance choosing to use a tube amp then one should double the power output recommendations accordingly. Was Jim referring to "high sonic quality" as judged purely by perception or by technical prowess and the sonic consequences? I don't know for sure, but I suspect it's the latter. An amp rated at 100 Watts that can double down to 400 Watts at 2 Ohms would qualify as an amp with more "high sonic quality" than an amp rated as 200 Watts that was heading into oscillation below 4 Ohms, when being asked to drive a sub 4 Ohm load. 

brayeagle
I have briefly tried my subwoofers with my 2.7s.  It did add some bottom and depth to the sound (fairly subtly) though it didn't change the character to the way the Joseph speakers sound in the bass.
I've had my subwoofers and an expensive JL Audio crossover since 2017 and it's such a damned hassle to properly add subwoofers I still haven't got around to it. It's continually on my "to do list."
And my interest is waning.  I don't find myself pining for more bass either with the Thiels or the Josephs.

I think that while measurements might not tell all about how an amp sounds, some aspects of sound are quite predictable from measurements.

Perhaps in a vague way. But you either forget that I have actually *heard* this combination of gear or you seek to invalidate my experience. Piss off.

@prof

My thanks, also, for your comments re: CS2.7 v. Joseph Perspective. If I were buying new in that price category, the Perspective would be on my short list. And your experience adds weight to my opinion that you need to reach even higher up the price scale to significantly better a Thiel. My guess is that I would have to spend north of $30K to notably better the sound I'm getting with my modded 2.4s.