Power Cable from wall to my conditioner?
Good Morning Pfeiffer, I recently explored this exact scenario. I have two systems, one PS AUDIO DS DAC, BHK Pre, And BHK 250 amp with B&W N 802's, and the second with Auralic G2 DAC, AudioNet Preamp, Classe Audio CA 2300 amp and Revel Studio 2 Salon2's. I had upgrade ALL my PC's to fairly inexpensive PC's ( int he $200 range) as I felt I should, but no big improvements noted. So I decided, like others have suggested, to call the Cable Company and try some upgraded cables. I have read lots, from 'upgraded power cables don't make a difference' to the other extreme of expensive cables do matter. I guess I was 'skeptical', as I had not heard much difference so far... Steve at the Cable Company is fantastic. He asked what price range, and I had no idea. He suggested trying cables from Shunyata, Synergistic Research and Audience. Well, I think that people who state that upgraded cables do not make a difference either: 1) have not heard good cables 2) do not have a system resolving enough to hear the difference or 3) can not hear these differences. I was blown away by the improvement of replacing the main cord into my Inacustik 3500p power conditioner (nice, check it out). All the cables, although each different, were an obvious improvement in clarity, bass, imaging etc. MY lady and I could always tell an improvement. The newer SR and Audience bested the older Shunyata. I ended up going through multiple trials and moving up the line of both SR and Audience. Drat! I could hear all the improvements! I ended up buying 4 Audience Cables, all Audience AU24 SX power cables, and replaced the main line to the Power conditioner and the PC to my amps, so two for each system. I further experimented with replacing the cables to the DAC's and Pre amps, but here the improvements were minimal..as if I had fixed things with two cables. All the cables I purchased from the Cable Company were used or demo's, at 30 or 40% of retail. Also the Audience cable lines are clearly defined, and sell easily on the resale market. Other companies seem to have so many models it is confusing and resale is more uncertain. So my take away was clearly that nice cables do make a huge difference. I did spend some bucks here...but the price of two power cables, while high, improved my systems more than a new component could. At least now I know..for the price of a deposit and shipping, I got to A / B compare over and over IN MY SYSTEM WITH MY EARS. I have since explored and upgraded my XLR interconnects as well with Audience AU 24 SX. Another clear enhancement. (to us). Finally, the Audience cables are just esthetically and functionally nice. They are not overly thick and easy to manage. There are no accessories to plug in etc. The SE models are so flexible...I wanted to be here...price too...but the AU 24 SX sound amazing. After hooking up and changing over and over you quickly learn what is easy and what is cumbersome. In summary I tired lots, and now know. Yes there are other brands I did not explore, but Steve's guidance was fantastic. I spent basically the cost of a component, and I feel the value and change were well worth it. If I now change a component, I have the Power Cable ready. Hope this helps...enjoy the journey! Ken in Maryland. |
You have made a considerable investment in your system. You also recognize the importance of power delivery to get the most out of your components. The more clean power you are able to get to your components the better they will perform. However it seems like you are only committed to go so far when it comes to investing in your power delivery. This may lead you to make choices that are steps sideways rather than forward towards achieving your goal. As a guide - Ideally one should invest 25-30% of your all in component MRSP in power delivery. That does not necessarily mean that you actually have to shell out that much. How you get there is up to you. From what I read I surmise that your investment in power delivery so far is less than 5%. - I highly recommend taking advantage of the used market. In order to maximize clean electrical flow (in a cost effective manner) to deliver as much power to your entire system - IMHO..This how I would approach it, use what ever info you feel is best for you. Your Conditioner - Isotek Aquarius if happy keep it - But a substantial upgrade for around the same investment you made - Audience - aR2p https://www.audiogon.com/listings/lisa057e-audience-ar2p-tosox-ac-conditioners Power distributor - Oyaide MTB R1 http://www.oyaide.com/ENGLISH/index.html There are some listed on Ebay, - The R1 is the best option Power Chords - The ones that have been recommended earlier on are certainly respectable Others to consider.. Audience.. http://audience-av.com/powerchord/au24seipowerchord/ Analysis Plus https://analysis.plus/product/power-oval-2-mk-ii/ Wywires https://wywires.com/collections/power-cords/products/digital-power-cord-juice-ii Also The cable Co. is a good resource they have lending Library to try out cables. https://www.thecableco.com/lending-library Are you using stock power chords from your conditioner to your components? If so I would Upgrade those as well. Begin with your DAC. I am not sure why you are not using the DAC on the Wadia 581. I would think it sounds much better, but if its not for you - sell it and put the proceeds towards your power. Good Luck. |
I have a Matrix cable feeding my P15 regenerator. Also tried Cerious extream Blue and HF revel. All had a different sound over stock. Only took a minute to know which sounded best for my deal. If I had it do over I'd the Matrix and the SR blue. Both have good return policies so keep the that sounded better. I've never found anyone that has tried both. From each camp folks tried one of these and never looked further Perhaps you can do the compare and share your findings |
