unman M-900u for Focal Sopras 2 and 3


I'm driving a Focal Sopra 3 with PS Audio Monoblocks.  I want to switch to Luxman M-900u.  Is that amp strong enough to drive the Sopra 2 or 3?
daj2832
I've run an M900u on my TAD CR-1's and it gets them plenty loud (86 dB/2.83V/m).  Prior to that I was using the BHK 300 Mono's, and I have not felt volume constraint.  Now, they are not the best match for the TAD's, tonally (too light and zippy in combo), so I am back to using the BHK's (with the C900u preamp!). 
@jbrrp1
" I’ve run an M900u on my TAD CR-1’s and it gets them plenty loud (86 dB/2.83V/m). Prior to that I was using the BHK 300 Mono’s, and I have not felt volume constraint. Now, they are not the best match for the TAD’s, tonally (too light and zippy in combo), so I am back to using the BHK’s (with the C900u preamp!)."

I found a very similar thing with m-900 and Sopra No2 and also m-900 and Dynaudio Confidence 30; to my ears the results were threadbare-- yes ultra detailed but not engaging; Flat and more 2-d.
A Pass INT-250 fleshes out sound (have not tried this on the Focal Sopra) in a more engaging and dynamic way;
Last year I had an X250.8 with an ARC-LS27 and I find the INT-250 be a better value; amazing sound from one chassis.

You might want to experiment with the INT-250 on your TAD’s.
That could be an interesting amp to try.  I bought a Pass Labs XA 30.8 for use with some high sensitivity speakers, and also I tried it out with the TAD's.  It was a bit warmer and "gauzier" in the upper bass, low mids than I would like, and it seemed to lack dynamic spark.  Now, it could just be underpowered for the TAD's, clearly, but it was not a good match.  So far, the BHK mono's have been the best with them.
As with all things in audio, you do hear some alluring aspects from the M900u that make you want that, but mixed with the best virtues of the other amps you try - - keeps us wishing, doesn't it!
..yes; Almost like an amp for every mood and album--I once had a dream where speakers were mounted on a 2-D gantry so that the speakers could be optimized per track...sigh.

So I know what you mean about texture in the upper-mids; I still have an XA-30.5 which is an amazing renderer of midrange --deep, dimensional, passionate; Just mesmerizing. In the right system pure magic. On 4 ohm dynaudios the bass/upper can be wooly at times but still very good; 

The INT-250 has some of that midrange dimensional character, not as buttery smooth, but has significantly cleaner and more refined top end; The mids are neutral and have a touch of warmth, not as golden imbued as the Lux m-900 combo but beautiful in own way; The bass power could blow apart most speakers and is never a bottleneck; The INT-250 just digs and digs the more you crank it; Never whimpers or compresses just gets bigger and bigger. I've said this before but this time I mean it ;) a keeper;

I found that Transparent Super Speaker Generation 5 are a great synergy with the INT-250 and speakers; I used to be in the "cables don't matter" camp but I have come a long way since then. 

I do think that the Luxman M900u has very promising sound qualities - - so much so that it gets me thinking about finding the right speakers to match it!  The TAD's are definitely not the right ones, probably more something along the lines of Sonus Fabers would be an outstanding match, I'm guessing.
To stay with the TAD's it would be interesting to try a powerful Pass Labs approach.