What are you using to drive your Tektons?

Pass x250.5, enzo 2.7

I have a pair of Electron SEs in a smaller 12x14 room and run them with two Schiit Aegirs.

I’m driving Double Impacts with a Primaluna Dialogue Premium HP with 1960’s Mullard EL34’s and Telfunken ECC82’s.In front of that I’ve got a Primaluna Dialogue Premium preamplifier with Telefunken ECC82’s and Amperex 5AR4 rectifiers. Feeding the digital signal is a Metrum Acoustics Ambre Roon end point to a Metrum Acoustics Pavane NOS ladder dac.I’ve recently built an external crossover for the DI’s and did some cabinet treatment. I’ve only got about 50hrs on them and Duelund wire that I rewired the speakers with and I gotta say so far the difference is really noticable. According to Grannyring (Bill Dion) here on
Audiogon, the difference is night and day once they settle and have about 250hrs on them.A big thank you to Bill for his support during this project.

I should add that I subbed in my Parasound A23 for the HP and I found that I lost some of the air, soundstage and the magical midrange that the Primaluna provides.
John Santos

My Impact Monitors are driven by an Aric Audio amp.KT150 tubes in se mode,sweetness + dynamics.

I drive my DI SE's with two different systems.  I go back and forth between PS Audio m700 mono blocks (with PS Audio Direct Gain Cell DAC/preamp) and the Anthem STR Integrated amp.

I do hear some hiss/noise though if you put your ear next to the tweeter!  Through both systems.

Surprised how well the m700s do with these speakers though being Class D.  PS audio has really made something special here.