GR Research NX-Extreme


Looks like a helluva lot of speaker for the money, even if you need to put it together which sounds kinds fun. Anyone built a pair of these or heard them? 
mofojo
The NX-Oticas are a pretty amazing value if you're willing to put in a little time to put them together. They produce a deep spacious sound stage with excellent clarity and detail and fantastic dynamics. They are very easy to drive with over 93db/watt efficiency. 

Downsides - they need to be several feet into the room to sound their best (mine are set up with the front of the battle about 6.5 ft from the front wall); they really need subs to be truly full range (they go down to 45 or 50 hz on their own, but matched with stereo OB servo subs, they are incredible); and, you have to put them together and finish them yourself (or pay someone to do it)

I really enjoyed the process of building them and am thrilled with the sound. I think these are the most satisfying speakers I've ever owned after 45 years in this hobby (and over a dozen speaker systems, many costing several times the cost of the NX-Oticas with subs).

If you've got high enough ceilings, I expect the NX-Extremes would be a nice step up, From what I've heard, they have a bit more punch in the mid bass and a little more height to the imaging. My ceiling is just under 8' which I don't think is high enough to allow these speakers to sound their best. 
Thanks Jaytor. Is the bass that it does have pretty impactful and fast? Ive never heard an open bafle design before. You wouldnt happen to live in Michigan would you? Would love to hear them. I have a JL 13in sub. Do you think that would mate up with the open baffle speakers ok? 
I built the OB subs with three 12" drivers for each channel. Danny's design can be built with 1, 2, 3, 4, or 6 drivers per sub, and flat packed are available for all configurations. The more drivers you have, the less each driver has to work and the faster they will settle when the signal goes away. 

The servo control makes them settle very quickly anyway, but with three drivers (6 for both channels), the bass is extremely fast and articulate. If you've ever heard Magneplanars, particularly larger ones, the bass has a similar quality except the GR subs go considerably deeper and are a bit more dynamic. 

The bass doesn't pressurize the room quite like a sealed box sub, since you are moving air from one part of the room to the other. So musical instruments sound more natural, but movie sound effects such as explosions don't have as much of a shock wave feel. If your primary use is home theater and you like movies with exploding helicopters, I'd probably stick with more conventional sealed box powered subs, but for music, the OB servo subs can't be beat. 

I would expect the OB subs to integrate much easier with the OB speakers compared to a traditional sealed box sub. It's kind of the same issue with trying to integrate subs with Maggie's. But I haven't tried so I don't know for sure. I would post your question on AudioCircle in the GR Research forum to see if anyone else has experience. 

I live in Portland, OR so quite a trek from Michigan. 

It took me about 50 hours to build both the NX-Oticas and subs.  Probably 30 for just the NX-Oticas. Most of that was painting. Building the cabinets was very easy - probably a couple hours total. The crossovers and wiring up the drivers took about 8 hours. And cutting and installing the NoRez for speakers and subs took another few hours. 

There are a couple of You Tube videos documenting how the GR Research loudspeaker flat packs (precut MDF panels you glue together and finish) are assembled. You don't need any woodshop tools except for some wood clamps (and glue, of course). The flat packs are very easy to put together, made with alignment dowels (just like IKEA furniture) and "biscuits". I love that you can finish them (or have it done for you, as in an automotive body shop for a Wilson Audio-quality paint job, or cabinet shop if you want a genuine wood veneer finish) any way you want.

Build threads are also posted on the Audiocircle GR Research Forum website. Join the fun! Once you get used to the idea, you realize it can take your hi-fi involvement to a new level, like super-charging your car's engine with a bolt-on blower kit. Ultra-high performance for the price of mass-produced mediocrity.

Danny Richie designed and has manufactured his own drivers (including the NEO3 planar-magnetic tweeter), and his cross-overs are the best in the business. Don't wait for a review of a GR Research product in Stereophile, it ain't gonna happen. But lots of speaker companies pay Danny to design the x/o's for their loudspeakers, He is a leader in the open baffle DIY market, highly respected by his peers, of which there are few. Um, does this make me a fanboy (I hate that term)?