Synergistic Research AC Master Coupler on all Components including Subs Over-Kill


I've done' a bit of reading on power cables.  One cable that keeps coming up in discussions is the Synergistic Research AC Master Coupler.
Also, I read Nordost's Foundation Theory paper.  https://www.nordost.com/dealer%20downloads/FoundationTheory.pdf  
In this paper's information they state, "Consistency is King!"  It goes on to read, "Use the same power cords to feed all the key components in the system. Once you have an audiophile cord between the wall and your distribution block, make sure that any further cords are of the same type or, at the very least use the same technology and materials. This usually means employing AC cords from a single manufacturer."

Millercarbon often suggests the- Synergistic Research AC Master Coupler.  I've done enough research that with patience, I can purchase this cable around the $250 - 350 range.

A couple of questions:
1. Would it be "overkill" purchasing Synergistic Research AC Master Coupler for all of my six components that can use an upgraded power cord (my DAC is vintage and has a fixed power cord).  If helpful the component are:- IsoTek EVO3 Aquarius power conditioner
- Primaluna integrated tube amp.
- VPI Classic Signature TT-  Manley Chinook Phone Stage
-  two Rel S/3 subwoofers

2.  Is the suggestion of employing power cords of the same type and from the same manufacturer hold any water among the folks here at Audiogon?

3.  Could the Rel S/3 be plugged into the medium power outlets of the my Power Conditioner? Those medium-current outlets deliver 1,150W continuous power.  I gotta think the answer is yes, but I gotta ask!  The sub's manual states it draws 22 watts at idle.  I have no clue what current they draw at my listening levels.  Not terribly loud.
Thanks!


malatu
Used I would lean towards the Tesla, especially because I know how easy it is to have the Active modded, either DIY or Michael Spallone, and how much improvement that will be.

Element Tungsten would be a good choice if you care a lot about midrange and want it as beautifully detailed and yet smooth and deep as can be. CTS is better- Copper improves the bass, Silver the top end- but Tungsten is awesome with midrange.

In terms of new the Atmosphere line is awesome. My Atmosphere Level III interconnect opened things up to a whole new level. I've heard a lot of Ted's stuff over the years. Nothing negative about the rest but nobody his record over the years is such that you cannot go wrong. There's little details like MPC mods but aside from that you can pretty safely assume that the more you pay the better you get- which is not at all true across the industry.
Where I think it gets hard is allocating resources. Alive is a lot better than Blue. No question. But $350 better? That would buy you two Orange Fuses. Which an Orange Fuse at $160 is way better than most $500 power cords.

That's about it for me. Last thought would be, just call Ted. The guy loves this stuff and fully believes in my style of bringing everything up to around the same level. Call and tell him what you have, your plans, your preferences, let him help you out. Maybe not so much if you want to go used. Although maybe even then. From what I have heard he is the kind of guy if he thinks a Tesla or other used cable is the way to go he will let you know. But for sure if you will be buying new.
Very insightful, thanks for taking the time!
I just noticed the Tesla has a 20 amp IEC.  Probably not an option for my application.

I shall continue this quest and further educate myself. Probably more questions to come at some point.  Cheers!


Millercarbon... I was mistaken about the tesla. I listed the wrong one from the website. There is a Tesla with 15 amp IEC.
Ok, I’m planning on calling Ted tomorrow but figured I’d ask the following question if anyone cares to engage. As I look around, I see some differences in power cords that I don’t understand, and I’m not having much luck finding a lot if any info on the topic.

A. Starting with basic high end power cords, they don’t have an MPC. Just all cord.
B. Some older cords, relatively speaking, have an MPC and tuning bullets.

C. Some of the newer cords don’t have an MPC but refer to: Active / UEF Shielding with built in power supplies, no MPC’s and no additional wires.
Questions:1. What is an MPC and what does it do for a power cord? Just the basics are good for me, I probably wouldn’t understand an engineers explanation! No offense.
2. What are tuning bullets and how are they integrated into the system. Do you actually turn them as you would a treble knob (feel free to giggle)? Or are they simply inserted into the circuit.

3. Is there an advantage of having an MPC, i.e., modding it?
4. Is there something that can C do that B can’t or is it simply a convenience not having extra components, such as an MPC as part of the power cord.

Ha! Typical. I started looking at 200 used cords, now I’m looking at $1,500 cords. Jeez
I think I have a handle on the difference of the levels of power cords.  If ya read enough, it eventually sinks in.