I have high efficiency 100dB speakers klipsch KLF 30 with mods im trying to decide pure class A or Tube amp Any Pure class A recommendations will be appropriated especially the one sound good at low volume under 6K MRSP .
Just keep in mind that a 100db speaker plays 100db volume with 1 single watt of input. With a speaker like that, 90+% of audio preamps and amps provide either more gain than makes sense for the system or more power than you could ever use and probably both.
A preamp that would make sense would provide about 6 db of gain and a tube amp would not need to be more than a few watts for most listening and certainly anything over 10 watts is simply overkill and a waste. You really just need enough headroom to stay within the amps ability to deliver what you need and not push it to where distortion increases.
Classic triodes and triode wired pentodes would be where I would go.
I’ve been here. Look into 2A3 SET amps. They will be excellent and as pure as you’ll ever want. Or Nelson Pass’s First Watt series of amps. All you need is 7 watts and you can still drive yourself out of the room.
You might want to check out Aric Audio. Tube products. Preamps with variable gain, maxing out at 20dB. Tube amps, SET and push-pull. I recently purchased his Special pre and am loving it. Has a nice Web site.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.