heaudio ,
Slope on the edged is not caused by phase shift, it is caused by bandwidth limiting.
Oh dear! Which is caused by the output filter which and causes phase shift and yes if you must have that included, "bandwidth limiting" as that’s what the filter is there to do, without bandwidth limiting you have no phase shift!!!! please get it right.
heaudio
This is another ClassD no filter with a bit of overshoot likely due to underdamping also indicating from a frequency response peak.
You really need to do some more understanding, JA used his high order special testing output filters because he didn't yet have the
Audio Precision's auxiliary AUX-0025 passive low-pass testing filter, which eliminates noise
Stereophile
Audio Precision sells a precision passive low-pass filter to be used between the output of an amplifier with a class-D output stage and an Audio Precision analyzer. Unfortunately, I have not yet upgraded my test system with one of these filters, so to examine the MX-D1's performance at low signal levels, I used an active sixth-order low-pass filter with a 20kHz bandwidth and a floating input.