Turntable Mats: Rubber, Felt or Cork.

I’m using a Herbie’s Way Excellent Mat on my Rega P8. It’s thin, doesn’t rob the sound, looks great, and couples well with LPs. It’s fairly cheap ($59.99) and is actually made near my home in South Texas. I find it much better than the OEM Felt or cork mats. One plus is I don’t get a lot of static electricity from it and it doesn’t stick to records when changing or flipping sides.

https://herbiesaudiolab.com/products/way-excellent-ii-turntable-mat?variant=12654105919543

It has one feature that seems troublesome but turns out isn’t. Dirt from the LP sticks to the mat surface. My records are clean... but the mat will attract dirt you didn’t know was there.

To clean it I use tape. Sometimes a loop around my fingers that I dab on visible dust and about once a month I cover the entire mat with clear shipping tape. It’s overlapped strip over strip so all the tape comes off in one piece and any dirt stuck to the mat is picked up and trapped in the tape.

So atmasphere, the obvious question for us non-scientists.  What material(s) have the same, or very similar, hardness as a typical vinyl LP?

I'm not a fan of acrylic, but it can be made to have a similar hardness as vinyl. An LP would do nicely but does not have damping ability owing to its mass. I've thought a great deal about building a mat that has an aluminum or stainless substrate imbedded in the vinyl, as a means of stiffening it and making the whole thing more dead.

@atmasphere You are correct regarding the damping ability of vinyl due to its light weight.  When I was experimenting per my post above, I recall leaving the rubber mat on the platter which effectively damped the ringing of the metal platter, then using a vinyl LP between the mat and LP I was playing after adjusting the tonearm height slightly.

Herbies sells these rubber dots, 2" in diameter and a thickness of maybe 3 or 4 sheets of paper (so very thin), and seems to be made out of cloth impregnated neoprene that has very effective damping characteristics.  I suggested he make a turntable mat out of this stuff but never heard back.  I thought it might work well on my Linn in place of the felt mat.

The TTW mat had some sort of massy metal base with a delrin top surface.

I fail to see how another lp ( or similar) product could be as effective as MyMat. It would require that at the very least the lp/mat and the lp playing be perfectly flat. That's hardly possible on a consistent basis. This is the first hurdle.

If you haven't yet read one of my customers' posts in Member's Reviews, do so. He used/uses a KAB polyglass mat and describes his experience with MyMats.