2. analog
  3. 155821-14687

Direct Drive vs. Idler Drive vs. Belt drive

I'd like to know your thoughts on the strengths and weaknesses of each drive system. I can see that direct drive is more in vogue over the last few years but is it superior to the other drive systems? I've had first-hand experiences with two out of the three drive systems but looking to learn more.
scar972
noromance's avatar
noromance
10,139 posts
 
@scar972  There's a photo on my System page. It's an aluminum light grease bearing with POM linings and ceramic ball. Made by a guy in Asia. SPH. sphBearing AT gmail com
neonknight
430 posts
 
@lewm 


Total 14.8 kg (Chassis 5 kg, Platter 9.8 kg); Power Supply 0.5 kg


So 21.6 pounds.

I even checked my math with a conversion program!

lewm
13,584 posts
 
Platter weight 9.8kg = ~21 lbs.  I see no conflict with what you previously wrote, if you're talking about the Bardo.
lewm
13,584 posts
 
Mike, Platter of SP10 Mk3 is listed as "10kg" or "21 lbs", everywhere. Not near to 30 lbs. It's heavy enough as is.
mikelavigne
2,216 posts
 
Mike, Platter of SP10 Mk3 is listed as "10kg" or "21 lbs", everywhere. Not near to 30 lbs. It’s heavy enough as is

thanks Lew, my 9 year old memory was recalling how heavy the case was with the motor and platter and my guess was wrong.

but.......there is no ’heavy enough’. :-)

my CS Port has a 60 pound platter, the American Sound AS-2000 has a 200 pound platter.
More to discover