High Fidelity Cables MC-0.5 Effect

@Lowrider57 that was my thinking, I’m not a Electrian but current is constant unless there’s a breaker in its path so it should get through into the reciever especially on standby. Which mine is set and the surge protector is live also.

I read one of your earlier posts stating your amp issue, is it fixed now. What’s changed in sound in your system since mc05 add ?
I’ve read people have 10 mc05 units in there systems, if there’s a good improvement might get one more max. It's been almost 4days I'm not sure yet, plus i have the mc05 helix signature which one guy says it takes even longer to breakin. So I'm looking forward to the improvement even more. Thxs

@68pete  That's what the residual effect is, wires will stay magnatized for a while after pulled out. How long I don't know, but you proved it when you unplugged your system for days away. When you plugged it back in it didn't take long because it had some magnatism left over in your wires. 

Ok, back to some Jethro Tull n Styx... 

@aseaman007, My information came from a conversation with Rick Schultz. The magnetic field is constant as long as there is power feeding the MC-0.5. And it travels through all connected conductors, even back to the service panel via the neutral (return) wire.

If you’re asking me why my first try with the modules didn’t work out, I now know that I didn’t give them enough breakin time. They had a harsh top-end and I was moving them to different positions.

Now, with three modules at the receptacles, I experience a lower noise floor, a layered 3D image, and a smooth top-end. Plugged into the duplexes gives me the most dramatic effect. Next, is in a power strip, and the least was in my power conditioner. Rick confirmed my findings with his research.

I’ve seen the pics of 10 MC-0.5’s being used. That was when they were first introduced, but I have to believe there is a point if diminishing returns.

Hmm, 4th day in the outlet, not sounding to good today. Weird, sounded better last 3 days.
Wonder why it does that goes from good to not so good.
But from other posts it sounds like this is normal. Any ideas why it would do that good to not so good.

aseaman, this is normal. I'm going to take a guess and say that it's due to fluctuations in the line voltage to the home and from the service panel. There are variations in voltage level, noise level, distortions in the sine wave of the AC. The magnetic field is constantly trying to align the electrons in this current and until the components in the module are fully run-in there will be inconsistencies. 

Just my take on the subject.
And 4 days is only 96 hours.