Speaker crossover mod. Your advice?

Byron,

There is another thread on Audiogon which might be of interest to you, "Capacitor log Mundorf Silver in Oil." It's a long thread but it logs the journey of several members who ended up with Duelund Cast crossover components. Those are very expensive components and I am not recommending them for your project just simply because for your crossover the cost would be huge. However, that thread does contain a lot of their impressions of other components they tried along the way.

I was going to suggest Mundorf Supreme as a good capacitor, but upon reading the large values you have in your speaker, I'm not sure what to recommend.

I am doing another speaker project and plan to use Clarity MR caps, Duelund Cast resistors, and North Creek 10awg or 12awg inductors, but I don't have nearly as many components as you, nor such high values.

What are you planning to do with the inductors, and are you going outboard with your crossover?

John

One more comment though, after reading your cap values again it is the woofer values that are the really big ones. Maybe it would be okay to just replace the midrange and tweeter caps as it's the inductors that would play the more important role with the woofer. Others on this or the other thread should be able to provide you with a more solid recommendation however.

Any opinions on the Cardas caps?

Thanks, John, for your advice. I will take a look at the Mundorf thread. I don't know the first thing about caps, so hopefully that will help.

I think the plan at this point is to replace the 2 caps for the tweeter, and possibly the resistor for the tweeter. I am going to leave the inductors alone.

As far as the midrange, I may do that down the line, if I am happy with the tweeter results. But for a first step, I am going to restrict myself to the tweeter. With that in mind, I have a basic, possibly stupid, question as I look around for replacement caps:

The caps for the tweeter are labelled "3.6J" and 6.8J." Does the "J" after the number mean joule? In my preliminary search, all the caps I am seeing are rated in µF. I don't see any caps labelled with "J". Why is that?

Bryon

J indicates value tolerance; I don't know what exactly 'J' means, but I"m sure someone does.
.