Why no interest in reel to reel if you're looking for the ultimate sound?

@scar972
In my main system downstairs, I have a Studer A820 1/2 inch and a 1/4 inch Otari MTR12 with a Dolby 363 NR unit, containing Dolby SR/ Dolby A cards.

https://i.vgy.me/Rye2Pf.jpg

https://i.vgy.me/OfKMvT.jpg

https://i.vgy.me/0tcXOh.jpg

In my study, I have the 2 R2R machines, which I could carry upstairs. I have a pair of Sony APR 5000 units (5003 & 5002) and a Studer A807/!! (all 1/4 inch) with another Dolby 363 SR/A unit.

https://i.vgy.me/xvuxdA.jpg

@topoxforddoc Very nice collection of professional equipment you have there! I had a chance to pick up a Sony APR 5003 at a good price but had to pass it up, how does it compare to the others you have? I have no room left for another large piece of equipment.

topoxforddoc

https://i.vgy.me/Rye2Pf.jpghttps://i.vgy.me/OfKMvT.jpg
https://i.vgy.me/0tcXOh.jpg ...
https://i.vgy.me/xvuxdA.jpg

Holy S&@*&!
Sweet!

Dear @orpheus10  : ""   always commenting on distortion and noise. ""

Look, for me the main differences between any two room/systems quality levels resides/belongs to which comes with lower levels of any kind of distortions/noises/resonances/vibrations generated by that room/system.

Main target in a room system: put all kind of those distortions at minimum and this permit us to listen more and better MUSIC signal information that was hidden behind those every kind of developed system distortions.

Maybe all those doe not have sense to you but that is always my take and that's why I post so often about.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.

@scar972 

You should have bought the Sony APR5003. It's the real sleeper in the R2R world. Spares are a problem, unlike Studer and Otari. The multi-pin connector for the headblock is totally unobtanium.

But the Sony has a really lovely transport and is really kind to tape. OK, it's a forced guidance transport, as opposed to the precision guidance on the A820 and A80. But the Sony is a superb design.

The calibration is all software driven with 3 store settings for each of 3 tape speeds. It will work at 3.75, 7.5, 15 and 30 IPS; you can run 3 speeds at any one time (the change down to include 3.75 is done with dip switches in the removable headblock).

The stock electronics sound really clean, and I wouldn't be interested at all in external tape repro preamps.

Finally, you can switch from 1/4 to 1/2 inch very easily. I missed out on a 1/2 inch headlock and rollers about 4 years ago. I still regret not buying that.

Charlie