New TT for ~$1500

You can read fremer’s review on Technics. Or watch this and compare :))

nothing wrong with a well designed 1500-2000 buck belt driven turntable! I have owned several in this price range and they all sounded great.

"Sounded great" for you, but you can’t even adjust VTA on those cheap tonearms.

Will you swap your nice Tannoy for Wireless speakers ? @audioguy85
Same about Technics and overpriced (entry level) belt drive toys

You mentioned REGA, I just returned to analogue after a long break .I tested the water with a low budget  manual table and was quite surprised for what I GOT for a very modest sum.And then took the big jump (INCURABLE AUDIOPHILIA) one with these new double /triple plinths  and the final  one with a suspended chassis  ... and I am still wondering what  justifies the wide price difference  between all these choices. An quasi frameless table for 6,000 while a similar idea  almost no frame around a rigid cast bar  for less than 800.I would be interested to  throw some money out of the window  on the latter to really compare it with the expensive sister because these two are visibly done along the same design direction (MINIMAL FRAME- NO SPLINT). Even a very special bearing  would not seem enough .It is time we take real look at these reviewers claims who justify any  price.The best amp I ever heard, the best turntable ever made  until the next issue and so on. JUST be careful  we should  try to listen at different items in a system we familiar with music we love and familiar with before we follow the prophets, GOOD LUCK

You mentioned REGA, I just returned to analogue after a long break .I tested the water with a low budget  manual table and was quite surprised for what I GOT for a very modest sum.And then took the big jump (INCURABLE AUDIOPHILIA) one with these new double /triple plinths  and the final  one with a suspended chassis  ... and I am still wondering what  justifies the wide price difference  between all these choices. An quasi frameless table for 6,000 while a similar idea  almost no frame around a rigid cast bar  for less than 800.I would be interested to  throw some money out of the window  on the latter to really compare it with the expensive sister because these two are visibly done along the same design direction (MINIMAL FRAME- NO PLINTH). Even a very special bearing  would not seem enough .It is time we take real look at these reviewers claims who justify any  price.The best amp I ever heard, the best turntable ever made  until the next issue and so on. JUST be careful  we should  try to listen at different items in a system we familiar with music we love and familiar with before we follow the prophets, GOOD LUCK

Any closer to a decision?

Two directions here. Get an old Denon DD table. Spend ~$400. This will give you a taste of DD. And if you sell it later you won't lose hardly a dime. I recommend spending a bit more on the cartridge.  The Soundsmith Otello is a steal at $399. Some of the new ATs are very fine cartridges. 
The second path is the new Schiit Sol. It comes with a cartridge installed. I believe one choice is the ATVM95E. The first upgrade I would make would be to pop on a new Shibata or Microline stylus. Take like 30 seconds. This will let you compare them easily. You also have 15 days to try the Schiit with a small restocking fee if a no go. 
Let us know what route you take, and your thoughts.