Fidelity Research FR64s Headshell dilemma

Dear @dover : ""  Just because the stylus is conical, does not mean alignment is irrelevant. """

you are rigth, stylus tip shape has no " interest "/is not involved in the cartridge/tonearm alignment set up.
That is only common sense that stupid persons not have because in any pivoted tonearm design always exist tracking error/tracking distortions all over the recorded LP surface but at the alignment null points.

Now, that a person can't detect the tracking distortions generated by that tracking errors and as you said does not means does not exist because always are there .

Problems about always exist with persons with extremely low knowledge levels.

R.

In the article written by Kessler and Pisha (Audio, Januari 80)
''Tonearm geometry and setup'' there is an chart with all adjustment
parameter for the most tonearms of this time . The possible errors
by the construction are also mentioned. The most errors are made
by ''offset angle''. The ''optimal offset'' is also mentioned.
By FR-64 S the Stevenson geometry is assumed . As we all (?)
know the spindle - pivot distance is different for Bearwald. This
geometry provide the best AVERAGE values for the record surface.
Stevenson give better results for the ''inner groves'' which distance
to the spindle is not clear. Besides the most records in my collection
have no ''inner grove problem'' at all. Only few records are ''cut'' 
near the spindle. For Stevenson geometry the ''effective length''
is 245 mm . For Bearwald 246. 
BTW by the most protractors the spindle dimension( thickenss) 
is not taken in consideration. Well by Mint tractor. As chakster
mentioned Mint tractor is meant for one tonearm only. I use 3
tonearms and ordered 3 Mint tractors. Those are very easy to
use. As far as I know only Dertonarm protractor has this
''spindle adjustment'' possibility. 

By FR-64 S the Stevenson geometry is assumed.

Exactly, this is how IKEDA designed his tonearms and it’s easy to check, because when PS is correct the stylus of his fixed (headshell integrated cartridges like FR-7fz) drops at Stevenson point without any adjustment, not at Baerwald or Lofgren, and ONLY in this position OFFSET ANGLE is correct with PS distance that stated in the manual and printed on FR template that comes with the tonearm.

Ikeda designed his tonearm with Stevenson alignment/geometry, period.

Everyone who think he’s smarter than IKEDA-SAN can experiment with alternative alignments or alternative PS distance, but in my opinion this is not necessary until a person can actually HEAR the difference according to his personal preferences.

I’m using FR-7fz with FR-64fx tonearm and this combination is stunning!

I can’t hear any f*****g distortion some people are talking about here. And i already have in use 2 more tonearms with Baerwald alignment next to my FR-64fx / FR-7fz combo with Stevenson. I can’t say which method is better, they are all good, no audible distortion for my ears (and my system is pretty good with all top quality components).

Anytime i have new tonearm and cartridge i follow manufacturer recommendation only, i trust to tonearm/cartridge designer more than to anybody else! Until i will be actually HEAR there is a problem i don’t care about all these pointless theoretical speech that one alignment is better than another.

Trust your ears (and experienced tonearm designer).

Dear chakster, the assumption that manufacturer ''knows better''
is based  on sand. By Ikeda's FR-64 S the offset angle is 21.930 
while the optimal offset angle is 22.421. By overhang the values
are 15.948 (Ikeda) and optimal 16.863. 
Being member of an authoritarian society does imply belief
in authorities (grin).  

Using FR-64fx tonearm I can put my FR-7fz or SPU on Dr.Feickert and the cartridge body is perfectly aligned according to all lines printed on my protractor (for cantilever and cartridge body alignment). The stylus tip on FR-7fz or SPU is on cross point of Stevenson. This is 100% accurate and sound is simply amazing. This is all i have to care about, thanks to Ikeda-San.

Enough said.