Fidelity Research FR64s Headshell dilemma

Dear chakster, the so called ''zero points'' on the record will be
on other ''points'' by Bearwald than Stevenson. That is the
whole point. Those points determine  the amount of the angle
errors made by each geometry. You may have eff. length right
but if your PS is different you obviously negate their mutual
dependance. Aka PS+ overhang= eff. length .

 . 

bukanona, the problem of the inner grove distortions is not invented
by hypothesis. The problem can be easy solved by reduction of
playing time on each side of the record. That is to say to avoid
critical part of the inner grove. People don't buy records depending
from time duration. This also means no need for Stevenson geometry.

Nandric, show me measurements not geometry assumptions.
I don't neglect models.
I am not believer in Stevenson or Baerwald superiority. 

bukanona, What do you want to measure, tracking angle error or the distortion that results?  The former is completely predictable using geometry handed to us by the Greeks and their mathematical descendants.  The latter is complex, because you would need a test LP that encoded a single test tone, e.g., 1 kHz, from outer to inner grooves.  It would be useful to have such a test LP, but I don't think it exists.

@karl_desch 
You have read, experienced and understood the same problem. The only thing you mis-understood was that i had thought 230mm only allows stevenson.
I was perhaps under the mis-apprehension that 230mm ONLY allows stevenson.
@rauliruegas I appeciate you sending me the link repeatedly - but my question related to cartridge shell alignment using Lofgren A at 231.5 - not what the actual distortion figures are. However, it, is nevertheless particularly useful as it shows and confirms what @dover has said and pointed out - namely that at 230mm one can do Bearwald, Lofgren etc.
Likewise @dover having experiences the same head-shell length thing confirms i am not going insane - i ought to try a cartridge that is longer or has a longer cantilever to try out 231.5 or get a longer head-shell. Until then I will use 230mm
For my purposes thanks and thanks again for the advice.