Azimuth 2020

Azimuth has a significant impact on channel balance when you start looking at frequencies out past 10K, and especially past 20Khz, which you can get on the Ortofon test records (and Denon if you can find them).

If you balance the crosstalk, so it is the same on both channels, then your azimuth is likely off. The forces are slightly different for the left and right channels, even with perfect alignment and that contributes to slightly different crosstalk. If you balance the frequency response, then you are getting consistent groove tracking on both channels.

Nice coherent explanation of your viewpoint.
Thanks.

Actually, because I have a Triplanar tonearm (with easy azimuth adjustment) and that Signet Cartridge Analyzer (which has a built-in db meter) I mentioned up above, I once experimented to find out how much could Azimuth alone alter channel balance, assuming that 90 degrees of azimuth gave perfect channel balance.  The result was a bit less than +/-2db, where the azimuth angle was radically off at either extreme, like a range of 60 degrees to 120 degrees, which one would never choose to live with.  I don't argue with anything you say in your post of 3:05 PM; my point is that azimuth is best used to manage crosstalk, not channel balance.  If I were faced with channel imbalance, there are other ways to correct it.  And while there is always a choice to shoot for equal crosstalk vs "best" crosstalk, my aim would be to try to achieve best numbers, R to L and L to R, regardless of the fact that the two values would not be equal.  But there are two sides to that question, and I recognize that others may disagree (like the guy who designed the Fozgometer).

And by the way, these days I rarely even try to adjust azimuth electrically. I have come to favor just getting the stylus to sit properly in the groove, which is usually very close to if not exactly at 90 degrees azimuth.  I leave it to the manufacturer to build the cartridge properly.

This isn’t true unfortunately,

my point is that azimuth is best used to manage crosstalk, not channel balance. If I were faced with channel imbalance, there are other ways to correct it.

I could spend hours typing, and never communicate well this topic, but fortunately, someone already went to all the trouble, and even has nice pictures: http://korfaudio.com/blog36

I can attest to what they surmise that the Ortofon test record does work (3rd blog post). I find the high frequency sweep is more sensitive, hence more accurate, but it is an easier test for me than it may be for others. A single tone THD may be easier for most.