Thanks for the kudos on the amps all- it was definitely a long-term collaboration between Tom and I, and as much as I anticipated positive results- what we received, are more than stellar! @mac48025 - Either the C3M or the EL84 driver (which is very much built like the C3M as they are both Pentodes) are my new drivers of choice for the 300B. In top flight builds I will be using the C3M. In more "cost-effective" builds I will go to the EL84. My own personal 300B SET's are getting the mod to the C3M as soon as my tubes arrive from Italy!
Aric Audio 300B SET Monoblocks
I’ve been fortunate to have had three previous builds by Aric but nothing has approached his latest creation. After owning Arics Transcend amp and two versions of 300B stereo amps from him I decided to go all out and have Aric build the best possible 300B SET he could. Here’s what we came up with.
300B SET monoblocks with two external, tube regulated power supplies. Hashimoto output and power transformers, Duelund coupling caps, C3M driver tubes, silver internal wiring, WBT Nextgen binding posts and RCA jacks, Furutech NCF IEC inlets, curly maple and walnut chassis lined in copper....and much more that I’m forgetting, I’m sure.
The result is spectacular and as good as the previous 300B SET’s were, this latest build is in another league all together. The power these amps provide belies their 8 watt output. Their bass output is deep, controlled and impactful. Their speed and transparency totally blow me away. Of course they display the purity of tone and 3-D qualities that SET’s are known for......in spades. The soundstage is huge. To me it combines the best qualities of solid state with the best of tubes. In other words, I love them!
While they sound more like 80 watts than 8 to me, efficient and easy to drive speakers go a long in realizing this.
Aric has obtained new levels of excellence with this amp. It also will come at a price, as it should. I don’t know what the retail price might be as I started with his standard 300B SET and upgraded twice to get to these but I can’t imagine they could sell for less than $10k and are probably over that. Hopefully Aric could chime in with general price information and fill in all of the missing blanks I left empty.
Just wanted to share my experience and excitement about these wonderful amps.
300B SET monoblocks with two external, tube regulated power supplies. Hashimoto output and power transformers, Duelund coupling caps, C3M driver tubes, silver internal wiring, WBT Nextgen binding posts and RCA jacks, Furutech NCF IEC inlets, curly maple and walnut chassis lined in copper....and much more that I’m forgetting, I’m sure.
The result is spectacular and as good as the previous 300B SET’s were, this latest build is in another league all together. The power these amps provide belies their 8 watt output. Their bass output is deep, controlled and impactful. Their speed and transparency totally blow me away. Of course they display the purity of tone and 3-D qualities that SET’s are known for......in spades. The soundstage is huge. To me it combines the best qualities of solid state with the best of tubes. In other words, I love them!
While they sound more like 80 watts than 8 to me, efficient and easy to drive speakers go a long in realizing this.
Aric has obtained new levels of excellence with this amp. It also will come at a price, as it should. I don’t know what the retail price might be as I started with his standard 300B SET and upgraded twice to get to these but I can’t imagine they could sell for less than $10k and are probably over that. Hopefully Aric could chime in with general price information and fill in all of the missing blanks I left empty.
Just wanted to share my experience and excitement about these wonderful amps.
- ...
- 13 posts total
Congratulations to Aric Audio for the stellar review of the Alpha 300B by Dwayne Carter / Enjoy The Music: http://www.enjoythemusic.com/magazine/equipment/0619/Aric_Audio_Alpha_300B_Push_Pull_Amplifier_Review.htm |
@david_ten Thank you! That was the TBT featured article from ETM from 2018. The editor contacting me to let me know they were featuring it on the home page- sweet! I also want to share the link to the review of my newest Push-Pull mono-blocks here in case anyone was interested. Note that I also have these up for sale on Audiogon currently. Thanks for taking a look and best regards! Aric http://v2.stereotimes.com/post/aric-audio-super-kt-pushpull-monoblock-amplifiers/ |
Thanks for clarifying, Aric. What follows is not 300B... but it may give someone interested in Aric Audio amps a feel for Aric's work. Mike Wright / Stereotimes: http://v2.stereotimes.com/post/aric-audio-super-kt-pushpull-monoblock-amplifiers/ |
- 13 posts total