2. analog
  3. 157904-1475

Is there an ideal (ish) cartridge output?

I just got done building the Pearl 2 and I went back and forth with gain and impedance. Using a cart that had .15mv and another at .3mv. I also have a Sony TA-5650 V-FET that has a vfet MM phono stage that I have been curious to try out. In that curiosity, I read the specs on the phono stage and its 70db SNR, which is meh. I then thought about SNR, THD, gain, and output of phono cartridges and stages. I looked at a lot of specs of cartridges and stages over the years, and as the gain of the stage goes up, the SNR goes down, which eventually leads me to this question:

Is the ideal cartridge output 1.5-2mv? Do you then get a medium output that is the best middle ground for SNR and THD? If that could be the case (or if not if you disagree) then why isn't there more cartridges with around that output available? 
enobenetto
yeti42's avatar
yeti42
287 posts
 
The most noticeable noise I get when replaying vinyl is from the record surface, the phonostage noise doesn’t seem to intrude. I looked up the specs for my phonostage and it claims a SNR of 82dB for a 0.5mV output and a gain of 64dB. I’m actually using an SPU Royal N with a 0.2mV output. (I have a VPI 16.5 and a Degritter to clean the records which helps).

If you’re after a medium output the EMT cartridges with around 1 mV seem to have a good reputation for not losing the music in the hifi.
lewm
13,019 posts
 
While I would agree that low moving mass is a desired quality in a cartridge, it cannot be the whole story. And if low moving mass per se is the major goal, then there are moving iron, induced magnet, and other types that inherently have lower moving mass than any moving coil cartridge. This subject comes up at least once every six months, if not even more often.
bukanona
174 posts
 
low moving mass of air core is preferable side effect - air core IMO works better as magnetic field is more homogeneous so sound is more fluent/real. 
enobenetto OP
67 posts
 
Interesting insights from all. Lewm, has heard this before, so I will search for more of his posts, there could be a lot of info I can find out. The low moving mass part of this discussion I have read about before. I would like to try an air-core cartridge when money permits. It seems that Lyra cartridges have a good compromise of all that has been discussed, maybe that is why they are so popular? Although, the sound is the sound, and if you don't like it, than it doesn't matter how it's made. 
nandric's avatar
nandric
4,086 posts
 
Dear Lew, Is your praise of ''your'' Ortofon MC 2000 not in
contradiction with your statement about ''output''? As far
as I know this cart has the lowest output ever(?) 0,05 mV.
Besides still one of the ''best ever'' despite its age. 
More to discover