Who says cables don't make a difference?

When I say that cables can’t add anything, they can only subtract, I’m pointing out the passive nature of wire. It is not an active component; ie, it has no gain over any part of it’s pass bandwidth. Therefore cable is what we call lossy. This general description applies equally to the cheapest and the most expensive of so-called “boutique” cables.
Of course, I hook-up my system with interconnects. I buy quality made cables,
purchased exclusively from mycablemart.com. These interconnects have gold plated hardware, good quality molding on the strain reliefs, and most importantly, the wire used is RG59. The cables have the added advantage of being extremely inexpensive while being almost identical in construction to the much more expensive “Blue Jeans” brand interconnects.
Of course, I have no idea what these cables “sound like” vis-a-vis other cables, but since I don’t ever compare cables, it really doesn’t matter, does it? All interconnects sound subtly different, and since none are 100% neutral, whether the cables cost $thousands or pennies, there’s no way to tell which is the most neutral (total neutrality is what I believe the goal of cables to be. Otherwise we are compromising the aim of high-fidelity; i.e. a high degree of faithfulness to the original performance or recording). Hope this answers Oldhvymec’s question.

georgemgraves
Of course, I have no idea what these cables “sound like” vis-a-vis other cables, but since I don’t ever compare cables, it really doesn’t matter, does it?

>>>>>>Not to you it doesn’t. But it probably does to many others. From each according to his abilities to each according to his needs. 😬

When I say that cables can’t add anything, they can only subtract, I’m pointing out the passive nature of wire. It is not an active component;

Take a piece of shungite and put it on the amplifier cover over the transformer.... Shungite is a "passive" piece of minerals....And observe the compression of the sound....

Now take a big chunk of quartz and put it on the same location and observe the clearing of the sound, a decompression but with too much accent in the higher frequencies now....


Third experiment put them together and report here your experience...

You will forget after that about ready made "scientific fact" about "passive" wire that are only engineering prejudice... You will discover why copper cable and silver one differ and can ADD something indeed....

:)

« "Science is history of science" said Goethe, i will add science is, at the beginning like at the end, nothing else» -Groucho Marx

I believe that cables definitely make a difference because all the people spending 10k-70k are not stupid to do so without hearing any difference 
I’m only using stock power cord and SVS speakers cables and interconnects because they looks gorgeous to me
Also have Audioquest NRG4 power cord I got from eBay I bought them just for the looks 
i believe 20amp lines speakers cables and power cord  make a difference But I can’t afford it We still don’t have a proper to way to measure them I know measurements and performance is different it doesn’t always translate good or bad 

watch this video from audioholics 


https://youtu.be/Rgun97VK7y8

Mahgister-

It’s not that silver cables “add something” over their copper equivalents, it’s that silver subtracts less because it’s a better conductor and has less resistance and possibly less capacitive and inductive reactance.
And in my considerable experience, things like shungite, quartz, myrtlewood, and the like placed on top of electrical components such as amplifier transformers achieve their results through a pair of phenomena called confirmation bias and expectational bias. But if you think these things make your system sound better, then that’s all that matters, isn’t it? Me, I think taking the money that others spend on improvements of dubious scientific worth, And buying more music improves my system immensely. :)