If you're interested in Spendors, you should really try to seek out an example in their Classic line, which come closer to your desiderata than the D line. Unfortunately, the Classic line is a bit harder to find in stores, as Spendor have been pushing the D's for some time.
Seeking advice on Speakers that create an intimate 2 channel listening experience
So the past month I started a couple of threads on speaker choice on AVS forum (One asked for Powered/Active floor standing Speaker choices and another one around non-active FS speakers for a tube amp I was looking at).
But I've come to realize this was the wrong tact, got lots of flack much deserved and wanted to try to solicit the advice/opinions on this forum which I just discovered.
Short background...Hunkered down in a suburb just outside NYC now for the past 3-4 months, I started to get the itch for a dedicated 2 channel stereo Turntable setup in our living room in May. After much research and twists and turns and immediate upgraditis, as some know on here from other posts, I've finally settled in and now own a Rega Planar 10 Turntable. I also own a Sutherland phono --20/20 with LPS and that's staying. Right now the phono preamp is hooked up direct to a pair of ELAC ARF51 floorstanding speakers (all drivers powered by built in AB amps) which I like a lot BUT ITS HERE THAT I WANT MORE. Btw, I love the ELAC design of mounting the tweeter concentric in the mid driver -- makes sense to me. I kinda wish ELAC would take the same design and make a reference speaker but thats for another day.
So to swap out the ELACs, I will obviously need an amp, but I will figure that out later and want to focus on getting the right speakers for me for what I want. So what do I want?
1. Floorstanders. Close to full range as possible. No subs.
2. Looks count since in my main living room.
3. Speakers that prioritize Imaging Imaging Imaging. That disappear in the room creating an intimate but 3D listening experience. Clean (Accurate) warm sound. No distortion. I would easily sacrifice low end for untiring highs and warm mids I don't listen to metal or hiphop anymore so I don't need loudness, more like lounge experience if that makes sense. Apologize if I got the adjectives wrong but its personal description of what I'm seeking.
4. Price Point - -$10k-25k. Room is 22x18 with 25 foot ceiling
I would like to audition/demo before I buy and since I live in the Tri-State area it should be possible. But I'm finding that obviously difficult to do right now. I listened to a pair of Salk speakers but didn't love them. And have an appt with the Audio Doctor in NJ in two weeks.
Thanks in advance.
But I've come to realize this was the wrong tact, got lots of flack much deserved and wanted to try to solicit the advice/opinions on this forum which I just discovered.
Short background...Hunkered down in a suburb just outside NYC now for the past 3-4 months, I started to get the itch for a dedicated 2 channel stereo Turntable setup in our living room in May. After much research and twists and turns and immediate upgraditis, as some know on here from other posts, I've finally settled in and now own a Rega Planar 10 Turntable. I also own a Sutherland phono --20/20 with LPS and that's staying. Right now the phono preamp is hooked up direct to a pair of ELAC ARF51 floorstanding speakers (all drivers powered by built in AB amps) which I like a lot BUT ITS HERE THAT I WANT MORE. Btw, I love the ELAC design of mounting the tweeter concentric in the mid driver -- makes sense to me. I kinda wish ELAC would take the same design and make a reference speaker but thats for another day.
So to swap out the ELACs, I will obviously need an amp, but I will figure that out later and want to focus on getting the right speakers for me for what I want. So what do I want?
1. Floorstanders. Close to full range as possible. No subs.
2. Looks count since in my main living room.
3. Speakers that prioritize Imaging Imaging Imaging. That disappear in the room creating an intimate but 3D listening experience. Clean (Accurate) warm sound. No distortion. I would easily sacrifice low end for untiring highs and warm mids I don't listen to metal or hiphop anymore so I don't need loudness, more like lounge experience if that makes sense. Apologize if I got the adjectives wrong but its personal description of what I'm seeking.
4. Price Point - -$10k-25k. Room is 22x18 with 25 foot ceiling
I would like to audition/demo before I buy and since I live in the Tri-State area it should be possible. But I'm finding that obviously difficult to do right now. I listened to a pair of Salk speakers but didn't love them. And have an appt with the Audio Doctor in NJ in two weeks.
Thanks in advance.
- ...
- 223 posts total
+1 for contacting Johnny R. At the Audio Connection in Verona. You might want to demo the Quatro Wood CT $15,499 / Pair. Internal powered subs and an extremely musical speaker. https://www.vandersteen.com/products/quatro-wood-ct |
Speakers that prioritize Imaging Imaging Imaging. That disappear in the room creating an intimate but 3D listening experience. Clean (Accurate) warm sound. No distortion. I would easily sacrifice low end for untiring highs and warm mids I don't listen to metal or hiphop anymore so I don't need loudness, more like lounge experience if that makes sense. Apologize if I got the adjectives wrong but its personal description of what I'm seeking.I totally "get" that you are being sincere with your priorities but nothing about these priorities equals "intimate". Perhaps the "warm mids"part qualifies. Otherwise your priorities point towards "sterile" and "analytical" vs. "intimate". First, all loudspeakers known to mankind not only distort, but distort more than any other competently designed link in the audio chain. That is an unassailable fact of life. Next, if you are sincere in your desire for intimacy, it is largely a matter of selecting a loudspeaker that mates well with a suitable amp that produces even order harmonics. And last, imaging is a factor of many things but largely with loudspeakers it means a narrow baffle, careful crossover design, and matching of drivers, left vs right. Standmounts naturally image better than floorstanders. There is no getting around that. My suggestion is TAD standmounts. |
| Post removed |
- 223 posts total