2. cables
  3. 158543-6504

Very bright SC and IC with coherence in imaging, soundstaging and timing

I have a new speaker with a 2“ BMR driver that handles everything from 250hz to 20khz. Naturally it can’t produce high frequencies as present as the mids. It needs +3db from 10khz on. No, I don’t want to look for a new speaker because I love for all other qualities.

Is there a speaker cable / interconnect that brings more treble energy yet still does not mess with timing (coherent speed), imaging, fullness and soundstaging ?

Up to 500 usd used, 8-10ft, black or clear color, round cables (no ribbons), sturdy, no boutique manufacturers, no diy. I usually prefer solid core over litz cables.

For 40w tube amp power

Thank you!
128x128zuio
dorkwad
548 posts
 
I have a couple pairs of Amadi Maddie Signature silver wire ICs and a couple pairs of Darwin Silver or Ascension silver wire ICs that are both very detailed, open, will light up the sound a little but with no harshness.  They are significantly better sounding than good cables such as Morrow MA-3 or 4, Crimson, mid priced Audioquest--have had all of them and some others.  Magnan, DNM, etc.   Am currently using Teo GC II doubles with the Schroeder Method and JW Reference doubles with the SM in my best system.  They make a great combination with my system.  

Bob
rixthetrick's avatar
rixthetrick
1,060 posts
 
Just out of curiosity, does it have a dip in the frequency response at about 2Khz?

I am surprised the designer used that driver and didn't accommodate for it in the crossover. I would be interested in what the bass driver is that is being used with it?

If you ever get to hear a speaker with the SEAS Exotic T35 X3-06 I think you might like it. It won't go quite as low as the BMR, but it's exceptional for a tweeter that is regarded as possibly one of the very best. 1500hz to 25000hz
magicrobert
16 posts
 
If you want to try the cable route, I have cables that I used to do exactly this. I just retired a system where I used Bolder M-80 cables, so it can be done. I will be selling them, but they fail your boutique criterion and the company folded shop. Copper & silver amalgam; 4 solid naked wires with slight twist. 
audioman58's avatar
audioman58
4,167 posts
 
Kimber 8 tc Litz is very good for each wire is isolated from the next 
the 12 tc  is a bit better still and great value.
jnorris2005
185 posts
 
Any speaker wire or interconnect that adds 3dB at any frequency is defective.  Might I suggest the Schiit Loki? 
More to discover