2. cables
  3. 158880-149144

Good entry level cables

Hi allnewbie here and I am totally confused. Just when i see and decide on a cable, another thread pops up recommending a different one... and I don't have time to keep changing different brand cables around to see what matches or sounds best. I probably only have an mid level system? So I need a consensus (not gonna happen haha) of what I need minimum now and for what piece of equipment.I have what follows- My room is 20x16. Ceiling height is 10'. Equipement is in the rear of the room. So I need speaker cables from FOH to the rear. This is new construction so I can place cables in wall or in ceiling. Probably 30' run of speaker cable. I've looked at monoprice, BJC, and others recommended on here that are REALLY expensive. I'm already over budget lol. Solid core, insulated strands?Power cables?Interconnects?In order of importance. What is the minimum I need? Best for the money?
Equipment as follows:
Atlantic Technologies 8200 - 2 fronts with 2 subs, a center, 2 pair surrounds4 Revel in-ceiling C763L for dolby atmos
Lexicon RV9Sony VPL-vw695es
Audioquest Niagra 1200Lexicon DD8-A for in ceiling revels (not purchased yet for $999 new) Anything better in this price range

obtuse2
lalitk's avatar
lalitk
5,632 posts
 
“Stranded cable may sound good, but presents a sound that is not quite as natural.”

auxinput,
It’s seems you have not heard Audio Envy cables. If you did, you have not made the above statement. The bottom line is most top cable designs utilize OCC as it gives the absolute purest base platform to get that much closer to true absolute transparency.

obtuse2 OP
3 posts
 
Can these be run in the wall? I’m doing new construction so I can run them through the studs behind the drywall
what about power cords? Ideas?
and thank you to posters above!
twoleftears's avatar
twoleftears
5,320 posts
 
Audio Envy covers home technology and studio installations as well as audio cables, so the head guy, whose name is Captain, will be able to give you complete guidance.
lalitk's avatar
lalitk
5,632 posts
 
@obtuse2,

I suggest you speak to audio advisor or Audio Envy directly so your specific needs can be addressed.

Both AudioQuest and Audio Envy makes full range of cables, i.e. IC’s, speaker and power cords.
auxinput
2,920 posts
 
It’s seems you have not heard Audio Envy cables. If you did, you have not made the above statement. The bottom line is most top cable designs utilize OCC as it gives the absolute purest base platform to get that much closer to true absolute transparency.

I have done a direct comparison between stranded OCC and low grade solid core.  Comparing an extremely high end expensive 14awg Furutech OCC stranded cable used as a power cord.  This comparison was with some lower grade copper, but used a multiple 20awg solid-core braided configuration.  I could hear that the OCC Furutech gave better resolution, but it had a weird phasing effect and the sound was not nearly as solid or natural as the low grade solid-core.  I would pick the low grade solid core every day because it was much more pleasing to listen to and give a much more realistic result.

This was just on a power cord comparison, using the exact same plug connectors, so it was truly apples-to-apples comparison.  I suspect this same result would be similar when comparing speaker cable.
More to discover