Integrated for bi-amping with AtmaSphere MA1s

I like a few different ones, depends on the duty. For bottom to top, Hypex modules, work real well. Mine are from Nord, in the UK, and got wonderful service. There is an option for volume control, rack mount, buffer board, opAmp options. There is a company called VTV on eBay, they have Hypex modules also, state side.

Your running a 2496, Behringer? That will give you 6 lines out with any signal you want for subs or otherwise.
I use them for all my, bass management including servo bass, MB / Bass columns, and standard low rider bass bins (under 36" tall). I use Behringer 12Ks for all my bass work. 450-550 for 4.5K per channel, and bullet proof. They are good to 2 ohm or less.  I think I paid 1400.00 for 3 new amps wit h3 year warr.
Full DSP, on the fly correction, for 6 channels.  2496/12k x 3. I’m a Mac guy so I have tone control to boot.

I mod them and disconnect 2 of the three fans, and put one on a toggle switch. They work perfect and have volume control, LP/HP filter, mono/stereo output. Did I mention 4.5K at 2 ohms and 3K plus at 4 ohms. LOL NO NOISE! Dead quiet, on the floor noise.

Second, my little toggle switch addition, makes for late night, low volume listening, with a flip of a switch, no fan noise, I’ve seldom gotten them warm without the fan, much less with, and with THREE, you’d be DEAF, if they ever got warm, they can really pump it out...VERY low distortion.

Regards

HONEST1rouge all so has pharaoh integrated amp class-d pharaoh on the lows  atmasphere on the highs and has subwoofer out puts to

I am very happy with my Pass INT-250. For the money, it will be hard to beat

honest1

The MA1’s OTL’s would be fast, so you need an amp to blend well with that, and yet have strong bass control, and yet with a good lower mid sound. I don’t think the 30w of the Aleph is the way to go.

If you want an integrated that can have speed good bass control and have good lower mids, Yes the Krell S300i would do, also a Gryphon Diablo 120 would be nice, or even a Pass Labs Int-60.

Cheers George

I've never heard an Ascendo loudspeaker, so I'm just speculating based upon what I've read.  Isn't one of their major design goals a coherence of presentation.  Wouldn't all these different amps, crossovers and subwoofers negatively effect the design goal?  Why not just run it with the MA-1, or if you want to max out, multiple sets of MA-1s.