Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions


I am the very happy owner of the first pair of New Tekton Design Encores and I thought I would create this thread to answer any questions anyone might have regarding the Encore speakers, room considerations, and associated equipment. If you’ve order your pair already, please chime in. I really want to hear what other people’s experience are with these unbelievable speakers.

I drive my Encores with both an Art Audio Diavolo SET 300b Tube Amplifier with 8wpc and I switch in my 700w Nord One-Up SE Monoblocks for non-critical listening and some big pieces of music that benefit from the extra power.



  • Made under U.S. Patent 9247339 with multiple new patents pending
  • Proprietary loudspeaker design
  • Ultra-linear frequency response with ±.5dB deviation from 70Hz-20kHz
  • One single crossover element placed within the tweeter path
  • Ultra-linear, entirely time-invariant minimum-phase mid-range section
  • Proprietary patent pending 15 dome radiating hybrid MTM high frequency array
  • Two 6.5" mid-bass patented ’overtone & harmonic’ transducers
  • Dual 11" low-frequency transducers
  • ​96dB 2.83V@1m sensitivity
  • 4 Ohm design for optimum performance
  • 20Hz-30kHz frequency response​
  • Dimensions Width 13.25" x Depth 15.25" x Height 62"
  • 800 Watt power handling
  • Weight 175 lbs​
128x128jcarcopo
Post removed 
Post removed 

jcarcopo - definitely better tweets in the di/se's than the standard di's.  per what i said, i suspect these are the same as what's in the encores, and i think the moab's, ulfberht's, and the prefect set's also use this same tweeter, tho w/different waveguide.

while it's hard to be certain, imo, the waveguide on the tweets in the di/se's and the encores looks closer to this, than the one you cited:
https://www.parts-express.com/wavecor-tw030wa14-30mm-textile-dome-neodymium-tweeter-with-heat-sink-a...
- just a bit more taper.  but, it could be an illusion, as both are listed as the same dimensions on wavecor's site, w/only difference being 4 vs 8 ohms

and i see nothing on the p/e website that looks like the bigger waveguides in the moab's and the ulfberhts.  and nothing on wavecor's site w/5 perimeter screws...

it's possible (likely?) that eric can get custom drivers, as he is ordering in quantity.  even for a single pair, ha ha!

doug s.
Its definitely a curious thing about these tweeters. 

Really really want to pull the trigger on a set of Ufs these days, but ultimately I think I may have to "settle" for the Encores based on size.  I literally have carboard boxes sitting on top of my Double Impacts to mimic the size of the Ufs and Encores. Left is is Encore and Right is Ufs. And to think I thought the DIs were overkill when they showed up. 

Either way, there is a 0% chance I will be disappointed in either. But I may always wonder if you could have managed the big boys.



Out of curiosity, could someone measure the height of the tweeter from the base of the Encore cabinet? I calculated the distance based on photos and ratios of the overall cabinet dimensions. Based on my calculations, the Encores tweeter actually sits higher by a few inches over the Ufs. Can anyone confirm this?
 
I'm wondering what that will do for my overall listening positioning in relation to tweeters. I sit relatively low in my modern style couch. 

Slapping the Encores on some Gaia feet, or other vibration isolation, and/or speaker platforms and suddenly the tweeter goes up another 4-5"


@sedond The link I provided was provided from a friend who also owns the Encores who had taken his tweeter array apart because he's crazy. (He even sent me a ghastly picture with all them tweeters hanging out, I felt sorry for the array...lol).  He sent me 2 links (one was the wrong tweeter) and I probably copied the wrong url.

@whacky, I would measure for you, but I can't locate my tape measure at this moment. I'm also dealing with cleaning up the aftermath of a nearby lightning strike which took out my modem, switch, router, Roon Server, and UPS that I know of. I have the Isoacoustic Gaia Titan Theia (they were a demo pair and cost about what the Gaia I cost and totally overkill, but maybe I'll buy the 1812 one day, lol!) I'm always in a reclined position when listening and therefore seated lower and everything sounds great to me so I wouldn't worry too much about the treble tweeter height being a tad higher. If I find the tape measure I will let you know, I misplaced it when I installed room treatments a couple of months ago and I just need to clear my mind and retrace my steps. :-)