2. amps-preamps
  3. 147376-5686

First Watt SIT-3 proper speaker matches

I have a SIT-3. I understand that it mates best with 4 ohm loads. I’m trying to find out if the amplifier is compatible with some 8 ohm loads. I am considering the Focal Kanta speakers that are 8 ohms and dip down to 4. The Focal Sopra 1 have been reviewed well with a 12w Valvet singled end solid state. I know there are other factors aside from impedance and efficiency but I’m not clear on the topic.
5560
douglas_schroeder
3,281 posts
 
This situation is similar to how Maggie lovers often claim that less than ideal tube amps are wonderful with the speakers. The OP should know that the matchup of the SIT-3 and the speakers will work. Is it the optimum, probably not. 

Nevertheless, the bugaboo is that even if you got a different amp that was supposedly "better" for the speakers, there is NO guarantee you will actually enjoy it more! Actual comparison is a must in these matters. I urge you not to dispose of the First Watt amps before you make a change. 

I ran First Watt J2 (pair) amps to drive the Kingsound King III speakers (ESL) and although not ideal, it was among the best sounds holistically of all amps I had used with the speakers. Just because the match is not perfect in no way means you are assured a more acceptable outcome simply because of trying to match up with a more ideal amp. It's just not that simple. 
gochurchgo
921 posts
 
No matter what Focal says, their speakers are 4 ohm speakers.
snopro
392 posts
 
I run Horning Eufrodite Ellipse with my FW SIT-3 and the pairing is excellent. I also use my Frankenstein Mk.2 300b's mono's and like them a little better, but I like tubes and the SIT-3 is a beautiful sounding SS amp.
If the Eufrodites are too big or not in your budget the Aristotle would be a good match.
More to discover