Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions

@jsoku I have been running source direct from a DAC happily for 20 years! I did try a Ayon Audio Stealth DAC which has a Tube Preamp in it and I felt like it robbed me of too much detail. That's entirely up to you, some people like to fatten and sweeten and warm up the sound more. I personally want my source pure and only have 2 digital sources and never needed a preamp anyway.  That's just me.  If you save money and gain resolution, even better IMHO!

JCARCOPO sensitivity is not efficiency your amps out put is about 3/4 watts to get 96Db not 1 watt the spec are miss leading it is all so 4 ohms not 8 so your at a real 90 Db sensitivity 2.83v@1 meter efficiency is in % not Dbs low power amps need high efficiency not sensitivity my speakers are 3% efficiency @ 8 ohms so 4 watts is 104 Db @ 2 meters not 96 Db  i am just saying you are happy with your new speakers that great i am not trying to bring you down happy listening

Ever hear of periods?

ditusa - whatever is it you are trying to say?

" sensitivity is not efficiency"
- ok, so it isn’t. but if a speaker’s sensitivity is 96dB 2.83V@1m sensitivity, that’s pretty efficient, no?

" your amps out put is about 3/4 watts to get 96Db not 1 watt"
- so, this means it’s even *more* efficient than if it needed 1 watt, right? or, are you saying the amp’s output needs to be 3 to 4 watts to get 96db, not three-quarters of a watt? and you know this because...? even w/4 ohm rated speakers, it will take 2w to get 96db, not 3 or 4w.

" my speakers are 3% efficiency @ 8 ohms so 4 watts is 104 Db @ 2 meters not 96 Db"
- so, if your speakers are 8 ohms, that means the sensitivity rating for 2.83V@1m would be 98db, right? 101db doubles the power to 2 watts, doubling the distance from 1m to 2m doubles the power again to 104db. (assuming 2.83v is equivalent to 1w)

" it is also (all so?!?) 4 ohms not 8 so your at a real 90 Db sensitivity "
now, i am aware that the 2.83v = 1w is for 8 ohm-rated speakers; for a speaker that sees a 4 ohm load, it takes 2w to get the same output. so, it’s possible (likely?) that at 1m, the encores are rated at 93db for 1w at 1m, not the 96db as stated, but not 90db either. still on the efficient side...

you really should post what others who are reading it, can understand what it is you’re trying to say. and get your facts correct.

doug s.

@jsoku I will certainly post about how the Aegirs work with the Encores. I ordered about two weeks after you, but as you say the timing could go any number of ways. I'm curious how you decided to go with Encores. You mention you have previously had other Tekton speakers.

In my case I have DIs and have been saving up to climb the Tekton ladder to one of their flagships. Ulfberhts just won't fit in my house. Moabs are pushing it size-wise. Encores I can do. Plus the descriptions I've seen about the sound profile of the Encores sounds closer to what I want than the Moabs. Anyway, I would be interested in how you arrived at Encores. With the popularity of the Moabs, Encores don't seem to get much attention lately.