Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions


I am the very happy owner of the first pair of New Tekton Design Encores and I thought I would create this thread to answer any questions anyone might have regarding the Encore speakers, room considerations, and associated equipment. If you’ve order your pair already, please chime in. I really want to hear what other people’s experience are with these unbelievable speakers.

I drive my Encores with both an Art Audio Diavolo SET 300b Tube Amplifier with 8wpc and I switch in my 700w Nord One-Up SE Monoblocks for non-critical listening and some big pieces of music that benefit from the extra power.



  • Made under U.S. Patent 9247339 with multiple new patents pending
  • Proprietary loudspeaker design
  • Ultra-linear frequency response with ±.5dB deviation from 70Hz-20kHz
  • One single crossover element placed within the tweeter path
  • Ultra-linear, entirely time-invariant minimum-phase mid-range section
  • Proprietary patent pending 15 dome radiating hybrid MTM high frequency array
  • Two 6.5" mid-bass patented ’overtone & harmonic’ transducers
  • Dual 11" low-frequency transducers
  • ​96dB 2.83V@1m sensitivity
  • 4 Ohm design for optimum performance
  • 20Hz-30kHz frequency response​
  • Dimensions Width 13.25" x Depth 15.25" x Height 62"
  • 800 Watt power handling
  • Weight 175 lbs​
128x128jcarcopo
ditusa - whatever is it you are trying to say?

" sensitivity is not efficiency"
- ok, so it isn’t. but if a speaker’s sensitivity is 96dB 2.83V@1m sensitivity, that’s pretty efficient, no?

" your amps out put is about 3/4 watts to get 96Db not 1 watt"
- so, this means it’s even *more* efficient than if it needed 1 watt, right? or, are you saying the amp’s output needs to be 3 to 4 watts to get 96db, not three-quarters of a watt? and you know this because...? even w/4 ohm rated speakers, it will take 2w to get 96db, not 3 or 4w.

" my speakers are 3% efficiency @ 8 ohms so 4 watts is 104 Db @ 2 meters not 96 Db"
- so, if your speakers are 8 ohms, that means the sensitivity rating for 2.83V@1m would be 98db, right? 101db doubles the power to 2 watts, doubling the distance from 1m to 2m doubles the power again to 104db. (assuming 2.83v is equivalent to 1w)

" it is also (all so?!?) 4 ohms not 8 so your at a real 90 Db sensitivity "
now, i am aware that the 2.83v = 1w is for 8 ohm-rated speakers; for a speaker that sees a 4 ohm load, it takes 2w to get the same output. so, it’s possible (likely?) that at 1m, the encores are rated at 93db for 1w at 1m, not the 96db as stated, but not 90db either. still on the efficient side...

you really should post what others who are reading it, can understand what it is you’re trying to say. and get your facts correct.

doug s.
@jsoku I will certainly post about how the Aegirs work with the Encores. I ordered about two weeks after you, but as you say the timing could go any number of ways. I'm curious how you decided to go with Encores. You mention you have previously had other Tekton speakers.

In my case I have DIs and have been saving up to climb the Tekton ladder to one of their flagships. Ulfberhts just won't fit in my house. Moabs are pushing it size-wise. Encores I can do. Plus the descriptions I've seen about the sound profile of the Encores sounds closer to what I want than the Moabs. Anyway, I would be interested in how you arrived at Encores. With the popularity of the Moabs, Encores don't seem to get much attention lately. 
@jcarcopo If my Aegirs don't end up working with the Encores I'm trying to develop a working list of other amps to consider. I have heard many good things about the XA25. I know the Tektons can be driven without much power, but I'm curious to hear your thoughts on the whole MORE POWER IS BETTER philosophy. Again and again people say things like "you can never have too much headroom," etc.

The XA25 sounding great with the Encores seems to run counter to that idea, especially as it only provides 50W at 4 ohms on a speaker that can handle 800W. For instance many people seem to love the Parasound A21+. It's nearly $2k cheaper than the XA25, but provides much more wattage. Have you tried using more powerful amps as well for comparison? Interested in your thoughts on this.


@SEDOND- the speakers are 4ohm.right..so if they drop to 2 ohm? that is 4 watts that is how they get 96 Db @ 2.83 volts sensitivity @ 1meter.that is ,why i said 3/4 watts.so this means the sensitivity is*less* right not *more*.and your right. when you said my speaker would be 98Db sensitivity. but they are not .they are 96 Db sensitivity @ 1watt @ 1meter .they are 8 ohms. they do not drop *below* 6 ohms true 8 ohms. the -op- speakers are a true 4 ohms. they do not drop below 2 ohms? that is why i said 90Db.not 93 Db i said my speakers are 3% efficiency they are.so the -op- speakers are about .5% efficiency? that is why i said miss leading.all so they do not tell you what frequency they sweep for sensitivity.-500Hz or 1000Hz or 2000Hz? jbl sweeps 100Hz to 500Hz sensitivity # is lower but efficiency is higher. the -op- said he call schiit audio.ask about the aegir amp. they told him.it don’t like 2ohm loads. i bought the same amp. they said what speakers do you have i said jbl 4435 monitor. they said your fine.that is what i mean by sensitivity is not efficiency.i am not saying to buy 4435. when you look at the 4435 manual they do not miss lead. i do not what to hijack the -op- i wish the best.the -op-has a great 8-watt amp it needs high efficiency speakers jbl is the only speaker company i know. that gives efficiency rating on there monitor.if the-op- asked tekton the efficiency on the encores thats the? i do not know all.i hope sum facts are corrected.