USB sucks


USB really isn‘t the right connection between DAC and Server: depending on cables used, you get very different sound quality if the server manages to recognise the DAC at all. Some time ago I replaced my highly tuned Mac Mini (by now-defunct Mach2mini, running Puremusic via USB) with an Innuos Zenith Mk3. For starters I couldn‘t get the DAC (Antelope Zodiac Gold) and server to recognise each other, transmission from the server under USB2.0 wasn‘t possible because the server is Linux based (mind, both alledgedly support the USB2.0 standard) and when I finally got them to talk to each other (by using Artisansilvercables (pure silver) the sound quality was ho-hum. While I understand the conceptual attraction to have the master clock near the converter under asynchronous USB, the connection‘s vagaries (need for exact 90 Ohms impedance, proneness to IFR interference, need to properly shield the 5v power line, short cable runs) makes one wonder, why one wouldn‘t do better to update I2S or S/PDIF or at the higher end use AES/EBU. After more than 20 years of digital playback, the wide variety of outcomes from minor changes seems unacceptable.

Since then and after a lot of playing around I have replaced the silver cables by Uptone USPCB rigid connectors, inserted an Intona Isolator 2.0 and Schiit EITR converting USB to S/PDIF. Connection to the DAC is via Acoustic Revive DSIX powered by a Kingrex LPS.

The amount of back and forth to make all this work is mindboggling, depending on choice of USB cables (with and without separate 5V connection, short, thick and God-knows what else) is hard to believe for something called a standard interface and the differences in sound quality make any review of USB products arbitrary verging on meaningless.

Obviously S/PDIF gives you no native PCM or DSD but, hey, most recordings still are redbook, anyway.
Conversely it is plug and play although quality of the cable still matters but finally it got me the sound quality I was looking for. It may not be the future but nor should USB, given all the shortcomings. Why is the industry promoting a standard that clearly isn‘t fit for purpose?

Finally, I invite the Bits-are-bits naysayers to go on a similar journey, it just might prove to be educational.
antigrunge2
USB is just fine, thank you very much.  Like everything else, there are many tweaks which can be applied to great benefit.
You're arguing that analog systems have infinite resolution, which is simply false. It's a commonly held belief, though.

I'm not arguing, I'm stating a fact, which has nothing to do with bandwidth or resolution. You are confusing bandwidth which you brought up earlier  and resolution now and whatever else with the simple fact that an analog waveform will, at any point in time, be at any one of an infinite number of possible levels. Anything continuous like an analog waveform has an infinite number of possible points. 

Q: how many point are there on a line? 
A: an infinite number

 Let's say for example your DAC has a minimum output level of zero volts and a maximum of 2 V and the output is a sine wave varying between those 2 levels. If you are correct, tell me what level between and 0 and 2 is it incapable of producing? What voltage levels does it skip on its way from 0 to 2v? 

.0000001 ?
.000001 ?
.00001 ?
.0001 ?
.001 ?
.01 ?
.1 ?
1 ?
1.1 ? 

and so forth

none of these and  none of the other possible infinite number of possible levels between these 




USB for a DAC??? Never.
I guess you realize that dogmatic statements like this without any context and nothing to back them up are basically worthless and add nothing to the conversation?

Noise in the signal will mask any resolution below the noise level.

what noise in what signal ? Are you claiming noise in the digital signal somehow makes it thru to the analog output or something else?  If you are, isolating the incoming noise from the USB line from the rest of the system is pretty well understood.