Should I upgrade my Tubes

I fixed it, my bad. I am totally digital streaming and I have a Codex which I guess I accidentally put in Preamp mode. Changed the setting and everything worked. Cost me 2 days of lost pleasure though.

I may punish myself (sic) by spending $ on another set of power tubes (as a back up) and enter the world of tube rolling. Any solid suggestions for listening to blues guitar, jazz and chicks singing ?

Also, do I need to be concerned about the 5 preamp tubes ?

You have one preamp tube (the middle 12AU7).      The rest of the nine-pin miniatures, comprise the front end of the Rogue’s power amp section.      If it’s sounding good; no (no worries).      Those will typically last much longer than the output tubes.       KUDOS, on finding the issue.

Check them at least, ay. Do you have a way, or know someone?

It will also tell you how much is still there, and when you might need to change them, or at least be looking for some good replacements.

Panic buying is no fun, over a valve. A spare or two is never a bad idea,
and you really don't want to let them FAIL, before replacing...
It can cause more than a valve to fail.. ok...

The Tubes, what a crazy band.... :-)

Regards

An easy, more noticeable (generally) and less expensive way to enter the tube-tasting whirlpool, than swapping power tubes: a change of the preamp tube.      There are a number of nicer 12AU7/ECC82 tubes, that will change the Cronus’ presentation.        Mention your tastes to any of the tube mongers I’ve listed.      They can easily guide you to sonic bliss (kinda flowery, but- yeah).      Some opinions, here: http://hktubeaudio.homestead.com/files/best_of_the_best_12au7.htm      One nice thing; many of the better NOS, nine-pins are rated for 10K hours.       That tube will need to be tested/certified for low noise.      Any good seller will know that and provide such.

After some research and calling Nick at Rogue Audio, he told me that the biggest impact will be by tube rolling the center (of 5) preamp tube 12AU7. He mentioned the Mullard 12AU7 NOS made in England for the military. Anyone have experience with it ?