Options for ridding records of static electricity


I am getting back into vinyl, listening to “garage sale” finds and also new albums that I have been picking up. I have a nice old Linn Sondek LP12 with the felt mat. Every time I go to remove a record from the spindle or flip the record, static electricity grabs the felt mat and it sticks like a magnet. I have to very carefully flip the felt mat at the corner with my finger but one of these times I’m going to slip and smudge or scratch a record. 

I’ve seen the “Milty Zerostat” and seem to remember this product from back in the day. I see that it is still made and there is one eBay vendor that has them for $77. Is this my best bet? I thought Michael Fremor talked about these in one of his videos. 

Are there other products I should look at to reduce static electricity on my records? Thanks for any help you can give.
masi61
jro1903, yes the Zerostat works but the trick is eliminating static formation
period. Any time your record develops a static charge it is drawing in dust and pollution like a magnet. 
Interesting orthomed. Isolating the record from the platter stopped the static formation. Can you fine out what the platter is made of? Both cartridges use a non conductive boron cantilever. I do not think the Achromat is discharging the record. I think it is isolating it from the platter. If the material the platter is made from is high in the triboelectric series that would explain your problem. 
Most of my records are in rice paper sleeves but I still find an occasional one in paper. Last night I pulled out Dylan's Nashville Skyline. I have not played it for several years. Sure enough it had a pretty decent charge on it. All my records are discharged during play. They always go back in the sleeve in neutral condition but this one developed a charge over two years just sitting in my collection!! My records are stored in a special compartmentalized record cabinet. They are packed in so there is always some compression but not so tight that they are hard to remove. This Keeps the records flat. I know that putting a record into a sleeve then pulling it out at a humidity of 54% does not create a measurable static charge. This would leave me to believe that under pressure for a prolonged period of time paper will transfer electrons to PVC without rubbing. 
The conclusion is there are multiple ways records collect static leading to multiple solutions. The first is put all your records in anti static sleeves. Sleeves that will not transfer electrons to vinyl. I just ordered another 50 from Sleeve City to get the stragglers. 
Post removed 
Lewm, sorry I missed your last post. 1:250 is a huge transformer. The 1:100 Sowter transformer is very large and is +- 3 dB 50 Hz to 18 kHz.
I cross over to subs at 125 Hz which is quite high. 500 Hz is well into the midrange. 256 Hz is about middle C. 
I have not had the chance to open up a Sound Labs interface yet. Can you just wire around the controls to eliminate them from the circuit without modifying the cross over network? I do not like pots in speakers signal path. Bi amping the transformers is an interesting approach. If I do Sound Labs I will try to wire past the controls and use one big amp like an Atma- Sphere MA 2. I will be able to correct any response aberrations with room control.  

Along with the record products I've also used Static Guard for laundry on the carpet in my listening room. It lasts for a couple hours and greatly reduces the static charge when handling my records.
I use a milty zerostat and change the sleeves to an anti static sleeve when I buy vinyl.... I also use a rega RP8 deck and have had no issues with static now. Before the felt mat used to stick when I changed records or sides.... Not anymore