Looking for a phono preamp that has volume control


Looking for a phono preamp that has volume control. I've gone digital and sold my preamp. I don't want to convert the analog to digital and play it thru my DAC. And I miss my records. So I'm looking suggestions, preferably tube phono preamp with  volume control.
jeffex00
Looks like I have a lot of homework to do to get the right combination. I thought the points that  charles1dad brought up were spot on. I don't really know how much gain my amps require or what my present cartridge puts out. So, I'll need to figure that out first and then start looking for a combination that meets the amps requirements. Thx everybody for your input.
That’s not true. Many phono preamps do not put out enough voltage to drive a power amp directly!
Read the whole post before saying "that’s not true"

That’s why I said it has to have 68db of gain or higher!!!!!! And many do these days!
Simple answer is Parks Puffin, now available with coax OR toslink out to galvinically isolate it. 
Zero chance of transposing hum.
It has a big pot in the middle.
Until you get a DAC with remote volume.
Shannon used to sell tube phono stages.
He has moved on.
great points from atmasphere

i would only add that phono stage gain is the most precious of all gains since it magnifies the original and smallest signal

so having more gain than you need at this critical point often introduces noise or distortion that can otherwise be avoided if gain were to be optimized to the cartridge output and the rest of system

to have a lot of excess gain at the phono stage, then to use a passive or other attenuator to reduce it down significantly is, imho, a very unproductive exercise
As atmasphere says:
Of these, its 4) that is the least understood, even by preamp designers.

Like you, here is where it gets confusing to me, but at least I’m trying to think your question out for myself.

The Aric Audio Transcend MM Phono Stage has a - Variable output level control for source matching.

http://aricaudio.com/products.php?product=MM12AX7#desc

Could this Variable output level control for source matching be used as a volume control? On is it just a gain pot only?

Thanks